Service manual

R62
3-3 Before Starting Electrical Adjustment
3-3-1 TW AIN Driver Installation
Install the PowerShot G1 USB Driver to PC.
(“Imaging Process Adjustment” is impossible when the RS-232C TW AIN driver is used.)
3-3-2 Installing the Adjustment Software
q
e
w
Double click : \AdjustmentSoftware \ PowerShot G1 \ English* \ Setup.exe \ , in this CD-ROM.
*When you perform the adjustment in the U.S.A., double click the Setup.exe in the “USA” folder.
When the dialog box below appears, click the “OK” button.
When the dialog box below appears, click the button. (Software installation will then
begin.)