Service manual
R64
3-3-4 Precautions for Connecting to a USB Port
After completing the preparatory steps, use Explorer and double click
C:\Program Files\PowerShot G1\PSG1.exe\
3-3-5 Menu Window
3-3-6 How to Use the Adjustment Software
■ Calibration/Adjustment
For starting, click the button related with adjustment.
* Whenever you use your light source for the adjustment for the first time, besure to click the
“Imaging Cal.” Button.
* Whenever you use your Standard 18% Gray Chart for the adjustment for the first time,
besure to click the “Flash Cal.” Button.
(For the details, refer to “3-4 Calibration” or “3-5 Adjustment Procedure”.)
■ Quitting the Adjustment Software
Click the “Exit” button.
■ Saving or Loading data
• “Save” button: This button saves all adjustment data stored on the camera in text format.
• “Load” button: This button loads all adjustment data saved in text format to the camera.
■ Saving or Loading data
• “Save” button: This button saves all adjustment data stored on the camera in text format.
• “Load” button: This button loads all adjustment data saved in text format to the camera.
■ Notes
• If the adjustment fails, a message indicating the failure will appear. If this happens, do the
adjustment again.
• The Adjustment Software is dedicated only to Canon Digital Camera PowerShot G1. Never use it
for any other camera.
• The Windows98 must be pre-installed on the computer that is equipped with the USB terminal.
(Windows95 does not support the USB.)
*The operation with the Win2000, WinMe, etc. is not guaranteed.
When the Adjustment Software starts up, the Menu Window below will appear.