Service manual
R83
3-5-6 Language setting
Unlike the conventional PowerShot Series (incl. IXY DIGITAL), the PowerShot G1 can select the
video output system (NTSC/PAL).
(The video output system is not settable with the Adjustment Software.)
On the other hand, the user cannot select the indication language of the LCD, as it is already
prepared for each destination as below. (2 kinds)
• 5 languages (N) : English, German, French, Spanish, Japanese
• 10 languages (P) : English, German, French, Dutch, Danish,
Finnish, Italian, Norwegian, Swedish, Spanish
Therefore, be sure to set the indication language of the LCD on the adjustment software.
■ Tool Used
• Personal Computer • Compact Power Adapter CA-560
• INTERF ACE CABLE IFC-200PCU • Adjustment Software
< Procedures >
1. Open the “Languages” Pull-Down Menu of the Adjustment Software.
2. Select any of the 5 languages (N) / 10 languages (P) according to the destination (or the initial
setting of camera).
Notes:
1. If the above setting is not performed, the language before the electrical adjustment is effec-
tive.
2. The MAIN PCB ASS’Y of Service part is set to the “5 languages (N)”.
* Before the electrical adjustment, it is recommended to take notes of settings of the indication
language and video output system.