Service manual

G24

-Playback modes Single, Multi (9 thumbnail images), Magnification or Slide show

-Magnify Approx. 2.5X or 5X on built-in LCD monitor

-Vertical and horizontal Vertical and horizontal conversion can be set on each image.

conversion (Both LCD and Video Out play an image according to setting.)

-Erasing modes Single image, all images (When "All images" is set, any images in the CF card captured

with another camera or peripheral device (DCF format) are erased. Regarding Canon

digital cameras, images taken by the PowerShot 600/600N, the PowerShot 350, Power

Shot A5, PowerShot A5 Zoom, PowerShot Pro70 will not be erased but those taken by

PowerShot A50 (DCF only), PowerShot S10, PowerShot S20, IXY DIGITAL, Power

Shot Pro90 IS and EOS D30 (DCF format) will be erased.) *Protected images are not erased.

-Computer I/F Universal Serial Bus (USB), RS-232C/RS-422,

-A/V out Video : NTSC or PAL selectable

Audio : monaural

Cable type : L-type plug (3.5mm dia.)

-LED (Upper LED) -Lights in green : Indicates that the camera is ready with flash off.

Charging battery completed (full charge)

-Blinks in green : Recording to CF card/Reading CF card/Erasing data on CF card

-Lights in orange : Indicates that the camera and flash are ready.

Charging battery completed (adequate charge for use)

-LED (Lower LED) -Blinks in orange : Indicates that the camera is ready (camera shake warning)/during

charging battery

-Lights in yellow : SW1 ON in macro shooting/manual focus shooting

-Power sources Rechargeable Lithium-ion battery (type: BP-511), AC adapter (type: CA-560),

Car battery adapter (type: CR-560) (option)

-Power current During shooting with LCD OFF : Approx. 130mA

consumption (excluding rush current) (Battery voltage = 7.4 V)

with LCD ON : Approx. 700mA

(excluding rush current) (Battery voltage = 7.4 V)

During playback with LCD : Approx. 500mA

(excluding rush current) (Battery voltage = 7.4 V)