Service manual

G36
<Play>
<Normal play>
-Set the main dial to “Play mode.”
-Press the Index button to to switch from Single to Multi. In Multi mode, to display 3X3 thumbnail images. The lower
right thumbnail is the latest one. Press the JUMP button to switch JUMP mode. In single play, press the Omni Selector
(LEFT/RIGHT) to jump 9 images ahead or back. In Multi mode, press the Omni Selector (LEFT/RIGHT) to jump next
or previous page. Press the SET+[LEFT] or SET+[RIGHT] to jump the last or first image in both modes.
-In Single mode, keep to press the Omni Selector (LEFT/RIGHT) button, to do high-speed image search mode. Release
the button to be select the image at that moment.
<Wireless Control Playback>
-To enable remote control operation, set the play mode.
-Operations with the Omni Selector and DISPLAY button, toggling between single-frame and multiple playback, and
image enlargement during playback are possible by using Wireless Controller WL-DC100.
-Press the shutter button of WL-DC100 to playback movie.
<Magnification>
-In Single mode, press the Magnification button to toggle in the following loop : 1X >>2.5X >>5X>>1X. Slelct desired
magnification ratio and magnify the image on the LCD monitor.
-Press the Omni Selector to scroll the magnified image.
<Movie Playback>
-A movie file (AVI) can be played with the SET button. During playback, press the SET button once to pause the playback
and press it again to resume playback.
-During playback, press the Omni Selector (LEFT/RIGHT) to stop the playback and see the previous or next image.
<Show info>
-Press the DISPLAY button. In Single play mode, standard display type and detailed type display type can be selected.
-Details of information are as follows;
<Standard display>
1.File number 2. Movie Icon 3.Image number/total number of images 4.Protect setting icon/Sound/Recording
pixels/Image compressionlevel / DCF annotated information icon 5.Shooting Date/Time
<Detailed display>
6. Shooting mode dial information 7.Tv value 8. Av value 9. Exposure compensation value
10.Flash exposure compensation value 11.Light metering method icon (spot metering only)
12.White balance setting icon 13. Macro/Manual Focus 14. ISO speed setting
<Other Play Settings>
-In the play mode, press the MENU button to display the Play Menu.
-Press the Omni Selector to select the desired item, then press the SET button. The following items can be set:
-Single Erase
-Erase all
-Protect
-Rotate (0 degree, 90 degrees, 270 degrees)
-Slide Show
-Print Order (Marks the images to be printed with Canon Digital Printer CD-300 and the printers compatible with
DPOF)