Service manual

R3
1-2 When a Problem Occurs
[Remedy]
• Check for any abnormalities in the mounting of probable faulty parts or connector connections
referring to the table below.
• Try replacing probable faulty parts referring to the table below.
[NOTE]
• Adjustments must be performed after the part has been replaced. For details, see “3 Adjustments.”
The camera does not work.
The image is not displayed on the LCD Monitor.
The image is not reversed even if the LCD
Monitor is rotated.
The photograph image is abnormal.
The zoom does not function.
The Display Panel (B/W LCD) is strange.
The Built-in Flash does not fire.
DC/DC CONVERTER PCB ASS’Y
(CN1/CN2/CN5/IC01/IC02/F01/F02)
MAIN PCB ASS’Y(CN01)
MAIN DIAL BRUSH
TOP MODULE UNIT
BATTERY BOX MAIN UNIT
BATTERY EJECT SPRING
POWER LEAD
HINGE UNIT
MAIN PCB ASS’Y(SW100/CN105/CN106)
BUTTON PCB ASS’Y(SW3)
LCD PANEL
LCD PCB ASS’Y
(IC102/CN100/CN101/CN102)
BACK LIGHT UNIT
HINGE UNIT
LCD PCB ASS’Y(IC105)
MAIN PCB ASS’Y(CN106)
OPTICAL UNIT
MAIN PCB ASS’Y
(CN103/CN104/CN107/IC121)
OPTICAL UNIT
MAIN PCB ASS’Y(CN102/CN103)
ZOOM BRUSH
TOP MODULE UNIT
B/W LCD PANEL
CONTACT RUBBER
TOP MODULE UNIT
MAIN PCB ASS’Y(CN102)
FLASH UNIT
DC/DC CONVERTER PCB ASS’Y(CN3/IC02)
TOP MODULE UNIT(IC1)
R27,E13,E14
R15,E1,E2
R41
R44,E5,E6
R53
R53
R53
R56
R15,E1,E2
R49,E7,E8
R58
R58,E3,E4
R59
R56
R58,E3,E4
R15,E1,E2
R21
R15,E1,E2
R21
R15,E1,E2
R30
R44,E5,E6
R42
R43
R44,E5,E6
R15,E1,E2
R46
R27,E13,E14
R44,E5,E6
See Page
Problem
(when an error code is not displayed)
Cause and Probable Faulty Part
* Numbers in parentheses ( ) are the symbols on the most probable circuit
component.