Operation Manual

'Output' settings - 'Binding edge'
#
DescriptionValuesSetting
The automatically set value for this setting.
'Auto'
'Binding
edge'
•
The output has a vertical format (height > width).
•
The binding edge is at the left-hand side.
•
When you turn a sheet over the binding edge, the
image or text on the back of the sheet is in readable
form.
'Portrait left'
•
The output has a vertical format (height > width).
•
The binding edge of the print is at the top.
•
When you turn a sheet over the binding edge the
image on the back side of the sheet is in readable
form. This means that every back of a 2-sided print
is upside down compared to the front.
'Portrait top'
•
The output has a horizontal format (width >
height).
•
The binding edge of the print is on the left side.
•
When you turn a sheet over the binding edge, the
text or image is in readable form.
'Landscape
left'
•
The output has a horizontal format (width >
height).
•
The binding edge of the print is at the top.
•
When you turn a sheet over the binding edge, the
image on the back side of the sheet is in readable
form. This means that every back of a 2-sided print
is upside down compared to the front.
'Landscape
top'
Media
The tile is read-only.
You can change the required media for the job through the media button in the preview
pane on the right side. When more than one media type has been defined for a job, a
separate button for each media type is displayed.
Chapter 6 - Print jobs106
Description of the print job settings