Operation Manual

The factory default templates
Overview of the templates#
When to useTemplate
Copy originals that have the same media size and only re-
quire simple settings, for example 2-sided or a staple.
'Copy job'
Combine several sets of originals and create 1 single copy
job.
When you select this template, the possibility to add subsets
is already displayed.
'Combined copy job'
Create booklets from paper originals.
When you select this template:
•
The 'Layout' setting is set to 'Booklet', and
•
The 'Media' setting is set to A3 / 11"x 17", because the
system assumes you want to create booklets of A4 / LTR
originals.
'Booklet job'
Copy a set of originals that consists of different media sizes.
The output will also consist of these different media sizes.
'Mixed size'
Reuse the settings of the previous copy job for your new
copy job.
'Last used'
NOTE
You cannot use 'Last used' when the previous job was a scan job or a combined copy
job.
•Create and use custom copy templates, on page 207
•Work with the workflow profiles, on page 320
Chapter 7 - Copy jobs 171
Introduction to the copy function