Operation Manual

'Output' settings - 'Align'
#
DescriptionValuesSetting
The automatically set value for this setting.
'Auto'
'Align'
An image on a sheet may be smaller than the media
size of the output, for example because you scaled the
image to 70% of its original size. The 'Align' setting
allows you to indicate the position of the image on
the sheet. 'Top left' moves the image to the upper left
corner of the sheet.
'Top left'
'Top center' moves the image to the centre at the top
of the sheet.
'Top center'
'Top right' moves the image to the upper right corner
of the sheet.
'Top right'
'Center left' moves the image to centre of the left side
of the sheet.
'Center left'
'Center' moves the image to the centre of the sheet.
'Center'
'Center right' moves the image to the centre of the
right side of the sheet.
'Center
right'
'Bottom left' moves the image to the lower left corner
of the sheet.
'Bottom left'
Chapter 7 - Copy jobs182
Description of the copy job settings