Operation Manual

'Output' settings - 'Margin erase'
#
DescriptionValuesSetting
Margins of a document sometimes contain notes or
punch holes, for example. The machine allows you to
hide these elements on the copy. With the + and -
buttons of the 'Binding edge' setting you can define
how much margin of the original you want to erase.
You can enter a value up to 100 mm / 3.94 inches.
'Binding
edge'
'Margin
erase'
'Output' settings - 'Adjust image'
#
DescriptionValuesSetting
The Adjust Image setting allows you to define the
copy and scan quality manually. Depending on the
situation you can describe the original or copy/scan.
•
If the original is unsatisfactory, enter a description.
•
If the original is OK, but you want a different copy
or scan, describe the copy.
'Describe
original'
'Describe
copy'
'Adjust im-
age'
With the 'Brightness' setting you can darken (-1 to -
3) or lighten (1-3) your print.
'Brightness'
With the 'Contrast' setting, you can change the differ-
ences between dark and light areas on your print. A
negative value reduces the difference, a positive value
increases the difference.
'Contrast'
With the 'Color' setting, describe the color of the
original or copy.
'Color'
Chapter 7 - Copy jobs 187
Description of the copy job settings