Operation Manual

Copy your documents
Make a copy
Introduction
A basic copy is a copy for which you only define a few settings before touching the Start
button , such as:
1-sided or 2-sided
A staple
The number of copies required.
Before you begin
Remove staples or paper clips.
Make sure that the originals in the automatic document feeder have the same size.
Make sure that the automatic document feeder does not contain more than 100 sheets
(80 g/m² or 20 lb bond).
Make sure that the originals are not curled.
How to make a basic copy
1.
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
2.
Touch 'Jobs' -> 'Copy/Scan' -> 'Copy job'.
3.
If required, define the settings and the required number of copies.
4.
Select 'Scheduled jobs' in the 'Destination' field to start copying immediately.
5.
Press .
The job is added to the list of 'Scheduled jobs'.
Chapter 7 - Copy jobs 201
Make a copy