Operation Manual

#
NOTE
•
The following paper sizes can be loaded into Paper Deck Unit-A1 and POD Deck
Lite-A1:
Paper Deck Unit-A1:
- A4, B5
- LTR
POD Deck Lite-A1:
- 330 × 483 mm, 320 × 450 mm (SRA3), 305 × 457 mm, A3, B4, A4, A4R, and
B5
- 13" × 19", 12 5/8" × 17 11/16", 12" × 18", 11" × 17", LGL, LTR, and LTRR
•
If a message prompting you to load paper appears during printing, the remaining
prints are automatically made after you load the correct paper. If you select another
paper source, the remaining prints are made after you press 'OK'.
•
If you want to change the paper loaded in the paper deck from plain to coated,
wait for the warm air fan to readjust the temperature before you change the paper.
Load the media into the bulk paper modules
1.
Press and release the Open button to open the paper deck.
The inside lifter automatically descends to the paper loading position.
2.
Open a package of paper, and remove the paper stack.
#
CAUTION
When loading paper, take care not to cut your hands on the edges of the paper.
#
IMPORTANT
Rewrap any remaining paper in its original package, and store it in a dry place, away
from direct sunlight.
Chapter 9 - Paper, toner, and staples258
Load the media into the bulk paper modules