Operation Manual

13.
Align the inner size change plate with the marks for the desired paper size.
A3
A4
12
5
/8 17
11
/16
11 17/LTR
12 18
320mm 450mm
305mm 457mm
13 19
330mm 483mm
(SRA3)
B4
B5
#
IMPORTANT
•
Make sure to align the inner size change plate with the marks for the desired paper
size. There are two locations with marks for paper size on the top of the inner size
change plate. Align the inner size change plate with the desired marks.
•
Make sure that the size change plate is properly aligned with the marks for the
desired paper size. If the size change plate is not properly aligned, Pod Deck Lite
may become damaged.
14.
Fix the inner size change plate with the two blue screws using a coin or something similar,
while slightly holding its centre front portion, and pressing it away from you.
•
Fasten the right blue screw before fastening the left blue screw.
Chapter 9 - Paper, toner, and staples268
Adjust the media size for the bulk paper module