Operation Manual

#
NOTE
•
If toner runs out during a print job, the remaining prints are made after you replace
the toner cartridge.
•
If black toner is left, you can continue copying and printing in black and white.
However, if a job is interrupted because cyan, magenta, or yellow toner runs out,
copying and printing in black-and-white is only possible for functions other than
the function being used for the interrupted job.
•
After replacing toner cartridges, if printed colors are different from the colors
printed before you replaced the toner cartridges, perform an automatic gradation
adjustment.
Replace the toner cartridge
1.
Open the toner replacement cover, holding both sides.
2.
On the operator panel, touch 'System'.
3.
On the operator panel, touch the corresponding arrow button of the toner cartridge that
must be replaced.
4.
Wait for the internal cover to open automatically, then pull the toner cartridge out of
the toner supply port.
Black Toner Cartridge Cyan, Magenta, or Yellow Toner Cartridge
Chapter 9 - Paper, toner, and staples302
Replace the toner cartridge