Operation Manual

Short descriptionAvailable settingsGroup of settings
The 'System settings' section contains
settings to change the date and time of
the system, or the system of measurement
used. When you change the system of
measurement, all corresponding values
on the system will be changed. For exam-
ple, when you change 'Metric' into 'Impe-
rial', all values will be displayed in inches.
•
'Date and time'
•
'System of mea-
surement'
•
'Time zone'
'System settings'
How to change key operator settings and system administrator settings via the
operator panel
1.
Touch 'System' -> 'Setup' -> 'Local key operator settings' (below 'Advanced').
2.
Touch the button of the group that contains the setting you want to change or view.
3.
Touch the required setting.
4.
Look up the required information or make the required changes.
5.
Press 'OK'.
Chapter 10 - Adapt printer settings to your needs330
Access Settings Editor settings via the operator panel