Operation Manual

Clean the glass plate and underside the feeder
Introduction
This section describes how to clean the glass plate and the underside of the cover plate.
#
IMPORTANT
If the glass plate or underside of the cover plate is dirty, the original may not be
scanned clearly, or the size of the original may be detected incorrectly.
#
NOTE
This procedure is necessary only if Duplex Color Image Reader Unit-A1 is attached.
Clean the glass plate
1.
Clean the glass plate and the underside of the cover plate with a cloth dampened with
water, and then wipe them clean with a soft, dry cloth.
#
IMPORTANT
Do not dampen the cloth too much, as this may damage the original or break the
machine.
Chapter 11 - Maintenance and calibration 347
Clean the glass plate and underside the feeder