Operation Manual

Clean the automatic document feeder rollers
Introduction
If your originals have black streaks or appear dirty after scanning them through the feeder,
clean the rollers of the feeder.
#
NOTE
•
It takes approximately 20 seconds to clean the feeder.
•
Use clean A4/LTR paper (60 to 80 g/m2 / 16 lb bond to 20 lb bond).
•
Feeder roller cleaning cannot be performed during printing.
Clean the ADF automatically
1.
Touch 'System' -> 'Maintenance'.
2.
Press 'Start maintenance'.
3.
Touch 'Clean the rollers of the ADF' and touch 'Start' .
A wizard opens.
4.
Put 10 sheets of blank paper into the feeder.
5.
Touch 'Next'
A status message displays.
6.
Press 'Finish'.
7.
Touch 'Stop' to close the 'Maintenance tasks' menu.
Chapter 11 - Maintenance and calibration354
Clean the automatic document feeder rollers