User guide

131
Playback/Erasing
3
Plug the other ends of the Stereo/Video
Cable into the VIDEO IN and AUDIO IN jacks
on the TV.
4
Turn on the TV and switch it to Video mode.
5
Power on the camera.
z The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 34). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and
others
- If the video system is set incorrectly, the camera output
may not display properly.
z When the camera is set to shooting mode, you can take
pictures while displaying images on the television.
To the Audio IN Jack
Plug (Left) (White)
To the Video IN
Jack Plug (Yellow)
To the Audio IN Jack
Plug (Right) (Red)