User guide

60
Shooting with Color Swap Mode
2
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor (or viewfinder) and press the W button.
z Only one color can be specified.
z You can use the S or T button to specify the range of the
colors that are retained.
-5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to retain.
3
Complete the setting with the ISO button,
and shoot.
z When you press the Movie button, you can shoot movies in
Color Accent mode.
z The default Color Accent is green.
z You may not obtain the expected results after color input
mode if you use the flash.
z The specified Color Accent is retained even if the camera’s
power is turned off.
Original Color
(Before Swapping)
Desired Color
(After Swapping)