Faxphone L100 Manual

17
6.
Change the telephone line type.
By default, the telephone line type is set to tone dialing. Skip the following steps in the procedure below if you select tone
dialing.
Follow the steps in the procedure below to select pulse dialing.
Contact your local telephone company if you are not sure of the line type that you are using.
Press [
] (Menu).
Press [ ] or [ ] to highlight <Fax TX Settings>, and then press [OK].
Press [ ] or [ ] to highlight <Basic Settings>, and then press [OK].
Press [ ] or [ ] to highlight <Select Line Type>, and then press [OK].
Press [ ] or [ ] to highlight the line type that you are using, and then press [OK].
<Pulse>: Pulse dialing
<Tone>: Tone dialing (Default)
Press [ ] (Menu) to close the Menu screen.
Preface
1
Installing the Machine and Specifying Initial Settings
2
Appendix
Installing the Drivers and Connecting to a Computer
3
Press [ ] (Paper Settings).
Press [ ] or [ ] to highlight
<Drawer 1>, and then press [OK].
Paper Settings
Drawer 1
1
Setting a Paper Size and Type
Press [ ] (Paper Settings) to
close the <Paper Settings> screen.
Press [ ] or [ ] to highlight
<Paper Type>, and then press [OK].
Paper Type
Plain (16 lb Bond-24
Plain L (16 lb Bond
...
Heavy 1 (24 lb Bond...
Heavy 2 (28 lb Bond...
Press [ ] or [ ] to highlight
<Paper Size>, and then press [OK].
Paper Size
LTR
LGL
STMT
EXEC