ENGLISH ESPAÑOL Canon Inkjet Office All-In-One Equipo multifunción para oficina Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference. Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
■ Contents 1 2 3 4 5 6 Preparation P.4 Install the FINE Cartridges P.10 Load Paper P.14 Set Up for Fax Reception P.15 Select Connection Method P.18 Set Up a USB Connection (Software Installation) P.19 7 Set Up a Wireless Connection P.25 Software Installation (1) P.26 Registration (Macintosh) (1) P.33 ■ Symbols Used in This Document Prohibited actions. Instructions including important information.
■ Machine Installation Flow ■ Flujo de instalación del equipo Network Connection Conexión de red USB Connection Conexión USB Wireless Connection Using from Additional Computers Conexión inalámbrica (when the machine is already connected to the network and you want to add computers from which to use the machine) Machine Preparation P.
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 40. Los manuales en pantalla se pueden ver en un ordenador. Se incluyen en el CD-ROM de instalación (Setup CD-ROM) y se instalan durante el proceso de instalación del software. Algunas partes del manual pueden aparecer en inglés.
■ Devices Required for Wireless Connection ■ Dispositivos necesarios para la conexión inalámbrica When using the machine over a wireless connection, a commercial access point or router that supports IEEE802.11n/g/b is required. Cuando utilice el equipo mediante una conexión inalámbrica, se necesita un punto de acceso o un router disponibles en comercios que sean compatibles con IEEE802.11n/g/b.
Preparation Preparación 1 1 3 1 2 4 5 6 7 A • Do not install the machine where an object may fall on it. In addition, do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction. • Paper Output Tray (A) automatically opens when printing starts. Do not place anything in front of the Paper Output Tray. Make sure all the following items are supplied. 1. 2. 3. 4.
Do not connect the power cord yet. 2 3 B B 3 2 D 1 A Remove all the protective materials and orange tape from the outside of the machine. C 1. Open the Paper Output Tray (A). 2. Make sure the Document Cover (B) is closed, then lift to open the Scanning Unit (Cover) (C). 3. Fix it with the Scanning Unit Support (D). • The tape and protective materials may differ in shape and position from those shown here. Aún no conecte el cable de alimentación.
4 5 F 1 2 3 E Remove both the orange tape (E) and the protective material (F) carefully. 1. Lift the Scanning Unit (Cover) slightly. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. Retire la cinta naranja (E) y el material protector (F) con cuidado. 1. Levante la unidad de escaneado (cubierta) ligeramente. 2. Pliegue el soporte de la unidad de escaneado. 3. Cierre después la unidad de escaneado (cubierta) con cuidado.
6 G H Connect one end of supplied telephone line cable (G) to the lower connector labeled “L” on the machine, and then connect the other end to the telephone jack on the wall (H). Use fax features? Yes Go to No Go to on page 8. . 1 7 I Only when connecting a telephone or an answering machine Sólo al conectar un teléfono o un contestador automático 2 Remove the Cap (I) (1), then connect a telephone or an answering machine with the telephone line cable (2).
8 9 Insert the power cord into the connector on the left side of the machine and into the wall outlet firmly. • Do NOT connect the network setup cable (USB cable) at this stage. • Make sure that the Document Cover is closed. Conecte el cable de alimentación en el conector situado en la parte izquierda del equipo y enchúfelo firmemente a la toma de corriente. • NO conecte el cable de configuración de red (cable USB) en este momento. • Asegúrese de que la cubierta de documentos esté cerrada.
When this screen is displayed, proceed to the next step. Cuando aparezca esta pantalla, continúe con el paso siguiente. When it is necessary to turn off the machine Cuando sea necesario desconectar el equipo 1 2 • Before removing the power plug, make sure that all the lamps on the Operation Panel are not lit. Removing the power plug while any of the lamps on the Operation Panel is lit or flashing may cause drying and clogging of the FINE Cartridges, resulting in poor printing.
Install the FINE Cartridges Instalación de los cartuchos FINE (FINE Cartridges) 2 10 1 2 3 A H G A 2 1 F E D 1. Make sure the Document Cover (A) is closed, then lift to open the Scanning Unit (Cover) (D). 2. Fix it with the Scanning Unit Support (E). • When you lift the Scanning Unit (Cover), do not touch the buttons on the Operation Panel (F) or the LCD (G). May result in unintended operation. 1.
4 5 J J I Open the Ink Cartridge Locking Cover on the right side. After removing the Black FINE Cartridge from its box, pull the orange protective tape (J) in the direction of the arrow and remove it carefully. Pinch (I) firmly and pull up the cover. • • • • Abra la tapa de bloqueo del cartucho de tinta del lado derecho. Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. Be sure to use the supplied FINE Cartridges.
6 7 Place the Black FINE Cartridge . into the right slot • Do not knock the FINE Cartridge against the sides of the holder. • Install in a well-lit environment. • Install the Black FINE Cartridge into the right slot , and the Color FINE Cartridge into the left slot . Coloque el cartucho FINE (FINE Cartridge) en la ranura derecha. negro • Procure que el cartucho FINE (FINE Cartridge) no golpee los lados del soporte. • Instálelo en un entorno bien iluminado.
8 9 10 1 2 3 Insert the Color FINE into the left Cartridge FINE Cartridge Holder in the same way as the Black FINE Cartridge. 1. Lift the Scanning Unit (Cover) slightly. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. Wait for about 1 minute until the LCD changes as shown in the illustration, then proceed to the next step. • Once you have installed the FINE Cartridges, do not remove them unnecessarily.
Load Paper Carga del papel 3 1 2 1 2 3 D C A B Open the Paper Support (A). Move the Paper Guides (B) to both edges. Load paper in the center of the Rear Tray (C). Load paper in portrait orientation with the printing side facing up. Abra el soporte del papel (A). Desplace las guías del papel (B) hasta ambos bordes. Cargue el papel en el centro de la bandeja posterior (C). Cargue el papel con orientación vertical con la cara de impresión hacia arriba.
Set Up for Fax Reception Configuración del equipo para la recepción de fax 4 Read this section only when using the fax features. Depending on your needs, select one of the following three modes for receiving faxes. You can change the receive mode after installation is complete. For details, refer to “Setting the Receive Mode” in the on-screen manual: Basic Guide. If not using the fax features, go to “5 Select Connection Method” on page 18.
Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives Si recibe una llamada de fax FAX only mode Modo sólo fax TEL priority mode Modo prioridad tel. While the telephone's ringtone sounds, pick up the handset. When the fax reception starts, replace the handset. If an answering machine is connected, the fax is received automatically. Mientras suene el tono de llamada del teléfono, descuelgue el auricular. Cuando se inicie la recepción de fax, cuelgue el auricular.
1 A B Press the FAX button (A), then press the Menu button (B). 2 C Use the [ or ] button (C) to select Receive mode set., then press the OK button. 3 Select a receive mode, then press the OK button. If the advanced settings screen is displayed Select No, then press the OK button. The selected receive mode is displayed. • For details on the advanced settings on the receive mode, refer to the onscreen manual: Basic Guide after installation is complete.
Select Connection Method Selección del método de conexión 5 Intended Use Uso previsto Connection Method Método de conexión • Connect to a computer with a USB cable. • Conectar a un ordenador con un cable USB. • Connect to computers without using cables. • Use from multiple computers. • Conectar a ordenadores sin usar cables. • Utilizar desde varios ordenadores. USB Connection Go to “6 Set Up a USB Connection (Software Installation)” on page 19.
Set Up a USB Connection (Software Installation) Configuración de una conexión USB (instalación del software) 6 Do not connect the USB cable yet. Aún no conecte el cable USB. For Spanish Users in the U.S.A. Para los usuarios de habla hispana en EE. UU. To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes.
If the USB cable is connected before the software is installed Si el cable USB está conectado antes de instalar el software Easy-WebPrint EX Easy-WebPrint EX 1 A Press the ON button (A) to TURN OFF THE MACHINE. Operating noise may continue for up to 30 seconds until the machine turns off. • Do not connect the machine to the computer with the USB cable yet. If it is already connected, disconnect the USB cable from the computer. For Windows 7 1. Remove the USB cable connected to your computer. 2.
2 3 1. Make sure that the machine has turned off. 2. Turn on the computer. 3. Insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.
4 5 Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed. Se instalarán los controladores, el software de aplicación y los manuales en pantalla. • Si desea seleccionar unos elementos concretos para instalarlos, haga clic en Instalación personalizada (Custom Install). 22 Select Use the printer via USB, then click Next. Follow any on-screen instructions to proceed with the software installation.
Important Information for the Installation Información importante para la instalación USB Port Puerto USB If the serial number is not displayed on the registration screen, input the number found inside the machine. Si el número de serie no aparece en la pantalla de registro, introduzca el que viene en el interior del equipo. If the Extended Survey Program screen appears Si aparece la pantalla Extended Survey Program B Serial No.
7 8 Installing the XPS Printer Driver Click Exit to complete the installation. For Windows For Macintosh It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. For Macintosh Solution Menu EX starts. Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place. • The buttons displayed on Solution Menu EX may vary depending on the country or region of purchase.
Set Up a Wireless Connection Configuración de una conexión inalámbrica 7 Before Configuring Wireless Settings Antes de configurar la conexión inalámbrica Make sure that the computer and access point or router are connected. Asegúrese de que el ordenador y del punto de acceso o del router están conectados. After confirming the connection, perform the following instructions to add (connect) the machine to the network.
Software Installation (1) Instalación del software (1) To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) For Spanish Users in the U.S.A. Para los usuarios de habla hispana en EE. UU. • • • • Quit all running applications before installation.
If the network setup cable is connected before the software is installed Si el cable de configuración de red está conectado antes de instalar el software 1 Easy-WebPrint EX Easy-WebPrint EX Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later (Windows) or Safari 4 or later (Mac OS X v.10.5 or later) is required to use this software. An Internet connection is required for installation.
2 Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. 3 Click Easy Install. The drivers, application software, and on-screen manuals are installed. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.
4 Click Install. 5 Select Use the printer with wireless LAN connection, then click Next. Follow any on-screen instructions to proceed with the software installation. 6 When the Printer Detection screen appears, click Next. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in . − − Haga clic en Instalar (Install).
7 8 9 A Make sure that any of the lamps on the mode buttons (A) lights, then click OK. When the Set Up New Printer screen appears, click Next. • If the Detected Printers List screen appears, click Set Up New Printer. Asegúrese de que todas las luces de los botones de modo (A) se iluminan y, a continuación, haga clic en OK. Cuando aparezca la pantalla Configuración de una nueva impresora (Set Up New Printer), haga clic en Siguiente (Next).
10 -A □ If the Detected Access Points List or Access Points screen appears □ Si aparece la Lista de puntos de acceso detectados (Detected Access Points List) o la pantalla Puntos de acceso (Access Points) If this screen does not appear, perform on page 32. En el caso de que esta pantalla no aparezca, ejecute de la página 32. 1 2 3 1. Select the target access point name/network name (SSID). 2. Enter the network key. Network key entry is case-sensitive.
10 -B 11 12 When the Disconnect Cable screen appears, remove the network setup cable, then click Next. When the Setup Completion screen appears, click Complete or OK. □ If the Confirm Connection Access Point screen appears □ Si aparece la pantalla Comprobación del punto de acceso de la conexión (Confirm Connection Access Point) • If the Automatic Setup screen appears, click OK, then perform - . Make sure that the target access point is displayed, then click Yes.
Registration (Macintosh) (1) Registro (Macintosh) (1) This section describes how to register the machine on a Macintosh computer. Windows users: go to "Information (1)" on page 36. 1 2 Mac OS X v.10.6.x/v.10.5.x Mac OS X v.10.4.11 − The machine is turned on. The firewall function of any security software is turned off. The computer is connected to the access point. En esta sección se describe cómo registrar el equipo en un ordenador Macintosh.
2 - B Mac OS X v.10.4.11 1 2 3 4 When the Printer List window appears, click Add. Click More Printers in the Printer Browser window. Select Canon IJ Network in the pop-up menu, select Canon MX410 series in the list of printers, then click Add. Make sure that Canon MX410 series is added to the list of printers. Seleccione Canon IJ Network en el menú desplegable, elija Canon MX410 series en la lista de impresoras y, a continuación, haga clic en Añadir (Add).
3 When the Register Printer and Scanner screen appears, click Register Scanner. 4 Select Canon MX410 series on the Canon IJ Network Scanner Selector EX screen, then click OK. 5 Click Next on the Register Printer and Scanner screen. Next, go to "Information (1)" on page 36! Cuando aparezca la pantalla Registrar impresora y escáner (Register Printer and Scanner), haga clic en Registrar escáner (Register Scanner).
Click Next. Follow any on-screen instructions to proceed with the software installation. Important Information for the Installation Información importante para la instalación Information (1) Información (1) 1 If the serial number is not displayed on the registration screen, input the number found inside the machine. Si el número de serie no aparece en la pantalla de registro, introduzca el que viene en el interior del equipo.
2 3 Using the Machine from Additional Computers Now that the machine is setup on your wireless connection, you can install the software and drivers on additional computers on the same network. Additional settings are not required. To add computers from which to use the machine, go to "8 Use from Additional Computers" on page 38. Uso del equipo desde ordenadores adicionales Click Exit to complete the installation.
Use from Additional Computers Uso desde ordenadores adicionales 8 If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica, se puede utilizar desde ordenadores adicionales de la misma red. To use from additional computers 1 2 Insert the Setup CD-ROM into the computer from which you want to use the machine. Follow the on-screen instructions to install the software.
Change from USB to Wireless Connection Cambio de USB a una conexión inalámbrica 9 To change to a wireless connection from a USB connection, start over from “7 Set Up a Wireless Connection” on page 25 to set up a wireless connection. Para cambiar a una conexión inalámbrica desde una conexión USB, vuelva a empezar desde “7 Configuración de una conexión inalámbrica” en la página 25 para configurar una conexión inalámbrica.
Application Software Software de aplicación 10 Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Junto con los controladores, en el ordenador se instala diverso software de aplicación. Puede imprimir elementos creativos corrigiendo/ mejorando fotos con las aplicaciones.
Print Photos from a Computer Impresión de fotografías desde un ordenador Try Using the Machine Pruebe el equipo 11 1 2 C A B Load paper in the Rear Tray (A) in portrait orientation with the printing side facing up. Make sure that the Paper Output Tray (B) is open. If printing starts while the Paper Output Tray is closed, it will automatically open. This section explains how to print images stored on the computer. • For details, refer to "3 Load Paper" on page 14.
3 Select a folder containing images, then select an image you want to print. 4 Click Select Paper, then select the Paper Size and Media Type settings that match the loaded paper. 5 Click Layout/Print, then select a layout for the image. When an image is selected, the number of copies is set to “1”. 6 Click Print. If you are using Windows, printing will start. If you are using Macintosh, click Print on the Print dialog box to start printing. • The machine may make operating noise when feeding paper.
1 2 C B 3 E Try Copying Realice una prueba de copia 1 3 2 G F A D Load A4 or Letter-sized plain paper. Make sure that the Paper Output Tray (A) is open. If printing starts while the Paper Output Tray is closed, it will automatically open. This section describes how to perform a standard copy. Open the Document Cover (B), then place the document face-down and align it with the Alignment Mark (C). • Do not place objects weighing 4.4 lb / 2.
1 2 A D Send Faxes Envío de faxes C B Press the FAX button (A). This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • Make sure that the telephone line type is set correctly. For the setting procedure, refer to "Preparing for Faxing" in the on-screen manual: Basic Guide. • The setting may not be available depending on the country or region of your residence. Pulse el botón FAX (A).
3 E 4 Insert the document until a beep sounds, then slide the left and right Document Guides against both ends of the document. • Place the document face-up. Use the Numeric buttons (E) to enter the fax number. 5 F Press the Black button (F). The fax is sent. • If fax sending is unsuccessful, make sure that the telephone line is connected correctly and start again from on page 44. To connect the telephone line correctly, refer to to on page 7 in “1 Preparation”.
46 Wireless Setup Using WPS (Wi-Fi Protected Setup) Configuración inalámbrica mediante WPS (Wi-Fi Protected Setup) Connection Using Other Methods Conexión con otros métodos 12 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). 1 A 2 B • For details on WPS, refer to the manual of your access point. Use the Menu button (A) to select Device settings. Use the [ or ] button (B) to select LAN settings, then press the OK button.
3 4 C Select WLAN active/ inactive, then press the OK button. Select Wireless LAN active, then press the OK button. Seleccione WLAN activa/inactiva (WLAN active/inactive) y, a continuación, pulse el botón OK. Seleccione LAN inal. activa (Wireless LAN active) y, a continuación, pulse el botón OK. When wireless connection is enabled, the Wi-Fi lamp (C) lights blue. Cuando se active la conexión inalámbrica, la luz de Wi-Fi (C) se encenderá en azul.
7 Select Push button method, then press the OK button. 8 9 Press and hold the WPS button on the access point (for about 5 seconds), then press the OK button on the machine within 2 minutes. For details on the WPS button pressing, refer to the manual of your access point. The Wi-Fi lamp (blue) on the machine flashes while searching for or connecting to an access point. Seleccione Método de pulsador (Push button method) y, a continuación, pulse el botón OK.
Wireless Setup Using WCN (Windows Connect Now) Configuración inalámbrica mediante WCN (Windows Connect Now) Read this section only when setting up a wireless connection by using the WCN (Windows Connect Now) function of Windows 7/Windows Vista. Lea esta sección sólo si configura una conexión inalámbrica mediante la función WCN (Windows Connect Now) de Windows 7/Windows Vista. A Setup on the Computer Configuración en el ordenador Windows 7 1.
Software Installation (2) Instalación del software (2) This section describes the procedure for WPS connection, WCN connection and connecting the machine to additional computers. The procedure is not necessary if the software was installed using the network setup cable. To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes.
For Spanish Users in the U.S.A. Para los usuarios de habla hispana en EE. UU. Easy-WebPrint EX Easy-WebPrint EX 1 B A Make sure that any of the lamps on the mode buttons (A) lights and that the Wi-Fi lamp (B) lights blue. • It is not necessary to connect the machine to the computer with the network setup cable. Refer to the "Información adicional para usuarios españoles" sheet to install the Spanish version of the software.
2 3 Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. For Windows • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. When the CD-ROM contents appear, double-click MSETUP4.EXE. Encienda el ordenador y, a continuación, introduzca el CD-ROM de instalación (Setup CD-ROM) en la unidad de CD-ROM. Si usa Windows, el programa de instalación se inicia automáticamente.
4 5 Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed. Se instalarán los controladores, el software de aplicación y los manuales en pantalla. • Si desea seleccionar unos elementos concretos para instalarlos, haga clic en Instalación personalizada (Custom Install). Select Use the printer with wireless LAN connection, then click Next. Follow any on-screen instructions to proceed with the software installation.
7 8 A When the Printer Detection screen appears, click Next. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in − − . For Windows Click Cancel and start again from , then be sure to select Use the printer with wireless LAN connection in . For Macintosh Follow on-screen instructions and proceed with the installation.
9 10 When the Detected Printers List dialog box appears, select Canon MX410 series, then click Next. When the Setup Completion screen appears, click Complete or OK. • If the machine is not detected, Set Up New Printer dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Redetect.
Registration (Macintosh) (2) Registro (Macintosh) (2) This section describes how to register the machine on a Macintosh computer. Windows users: go to "Information (2)" on page 59. 2 − − − The machine is turned on. The firewall function of any security software is turned off. The computer is connected to the access point. • Los caracteres alfanuméricos que aparecen a continuación de Canon MX410 series son el nombre del servicio Bonjour o la dirección MAC del equipo.
2 - B Mac OS X v.10.4.11 1 2 3 4 When the Printer List window appears, click Add. Click More Printers in the Printer Browser window. Select Canon IJ Network in the pop-up menu, select Canon MX410 series in the list of printers, then click Add. Make sure that Canon MX410 series is added to the list of printers. • When the You have no printers available. screen appears, click Add. Cuando aparezca la ventana Lista de impresoras (Printer List), haga clic en Añadir (Add).
3 When the Register Printer and Scanner screen appears, click Register Scanner. 4 Select Canon MX410 series on the Canon IJ Network Scanner Selector EX screen, then click OK. 5 Click Next on the Register Printer and Scanner screen. Next, go to "Information (2)" on page 59! Cuando aparezca la pantalla Registrar impresora y escáner (Register Printer and Scanner), haga clic en Registrar escáner (Register Scanner).
Click Next. Follow any on-screen instructions to proceed with the software installation. Important Information for the Installation Información importante para la instalación Information (2) Información (2) 1 If the serial number is not displayed on the registration screen, input the number found inside the machine. Si el número de serie no aparece en la pantalla de registro, introduzca el que viene en el interior del equipo. A Serial No.
If the Extended Survey Program screen appears 2 3 Si aparece la pantalla Extended Survey Program Click Exit to complete the installation. For Windows For Macintosh It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. For Macintosh Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place.
Using the Machine from Additional Computers Now that the machine is setup on your wireless connection, you can install the software and drivers on additional computers on the same network. Additional settings are not required. To add computers from which to use the machine, go to "8 Use from Additional Computers" on page 38.
Maintenance Mantenimiento 13 After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required. If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right automatically.
Copy Specifications General Specifications Specifications 14 Printing resolution (dpi) Multiple copy 4800* (horizontal) X 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. max. 99 pages Interface Intensity adjustment 9 positions, Auto intensity (AE copy) USB Port: Hi-Speed USB *1 Direct Print Port: PictBridge Bluetooth v2.0 (Option) *2*3*4 USB flash drive LAN Port: Wireless LAN: IEEE802.11n/IEEE802.11g/IEEE802.
Minimum System Requirements Operating System/Processor/RAM Mac OS X v.10.6 Intel processor 1 GB Mac OS X v.10.5 Intel processor, PowerPC G5, PowerPC G4 (867 MHz or faster) 512 MB Mac OS X v.10.4.11 Intel processor, PowerPC G5, PowerPC G4, PowerPC G3 256 MB Browser Internet Explorer 6 or later Safari 3 or later Hard Disk Space 1.5 GB Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. 1.5 GB Note: For bundled software installation.
Requisitos mínimos del sistema Especificaciones de fax Línea aplicable Red telefónica conmutada pública (PSTN, Public Switched Telephone Network) Modo de comunicación Super G3, G3 Sistema de compresión de datos Negro: MH, MR, MMR Color: JPEG Velocidad del módem Máx. 33,6 kbps (Sistema alternativo automático) Velocidad de transmisión Negro: Aprox. 3 s/pág.
Getting Help from Canon Ayuda de Canon Email Tech Support — www.usa.canon.com/support Soporte técnico por correo electrónico — www.usa.canon.com/support Please note, from there you will need to select your product, then click on the "Support by Email" link under Service & Support. Toll-Free Tech Support— 1-800-OK-CANON This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays), during the warranty period.