English 00-QSG_E_M_MAIN.fm Page 1 Wednesday, August 21, 2002 4:36 PM Quick Start Guide Be sure to install the software programs before connecting the scanner to the computer! Setup and Scanning Check the Package Contents 3 p. Install the Software 4 Windows p. Macintosh p. 5 6 Unlock the Scanning Unit p. Connect the Scanner p. Try Scanning p. 7 8 Try the Additional Features Using the Scanner Buttons p.11 Scanning Film 12 p.
00-QSG_E_M_MAIN.fm Page 2 Wednesday, August 21, 2002 4:36 PM Guide to the Manuals Open the Package Quick Start Guide (this guide) This guide describes a series of processes, from opening the package to using the scanner. READ THIS GUIDE FIRST! Scanning Guide (HTML format manual) HTML Refer to this guide when you have finished setting up the scanner according to the procedures in the Quick Start Guide.
00-QSG_E_M_MAIN.fm Page 3 Wednesday, August 21, 2002 4:36 PM English Check the Package Contents Scanner and Accessories CanoScan 5000F CanoScan 5000 USB Interface Cable AC Adapter Film Guides for CanoScan 5000F (for a film strip and slides) Documents and Software Programs • Quick Start Guide (this guide) • Additional Documents • CanoScan Setup Utility CD-ROM • The two figures in the brackets below indicate the respective sizes of the Windows/ Macintosh versions of the software.
00-QSG_E_M_MAIN.fm Page 4 Wednesday, August 21, 2002 4:36 PM Install the Software (Windows) • With Windows XP/2000, you should log on with an administrator user name when you install or uninstall software programs. 1 Turn the computer on. If the "Found New Hardware Wizard" or "Add New Hardware Wizard" appears, click [Cancel]. 2 Place the CanoScan Setup Utility CD-ROM in the drive. After you select your language, the CanoScan Setup Utility main menu will display. 3 Click [Install the Software].
00-QSG_E_M_MAIN.fm Page 5 Wednesday, August 21, 2002 4:36 PM English Install the Software (Macintosh) 1 Turn the computer on. If the “...Would you like to look for the software on the Internet?” appears, click [Cancel]. 2 Place the CanoScan Setup Utility CD-ROM in the drive. After you select your language, the CanoScan Setup Utility main menu will display. If no window displays, double-click the CD-ROM icon, then the Setup icon. 3 Click [Install the Software]. Read the SOFTWARE USER LICENSE AGREEMENT.
00-QSG_E_M_MAIN.fm Page 6 Wednesday, August 21, 2002 4:36 PM Unlock the Scanning Unit • Unlock the scanning unit before connecting the scanner to the computer. If it is left locked, a malfunction or other problem may occur. 1 Open the document cover and peel the seals from the scanner. 2 Push the lock switch toward the unlock mark ( ). Lock Switch Unlock Mark • When transporting the scanner, always lock the scanning unit by pushing the lock switch toward the lock mark ( ).
00-QSG_E_M_MAIN.fm Page 7 Wednesday, August 21, 2002 4:36 PM English Connect the Scanner • Confirm that the scanning unit is unlocked. (P.6) 1 Peel the caution seal from the back of the scanner. 2 Connect the FAU cable to the scanner (CanoScan 5000F only). 3 Connect the scanner to the computer with the supplied USB interface cable.
00-QSG_E_M_MAIN.fm Page 8 Wednesday, August 21, 2002 4:36 PM Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. Top Bottom Windows 2 Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5]. Alignment Mark Macintosh 2 Double-click the [Applications (Mac OS 9)] and [PhotoStudio] folder and the [PhotoStudio] icon.
Try Scanning Windows Macintosh 3 Click the Acquire icon 3 Click the Acquire icon ScanGear CS will start. ScanGear CS will start. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button. When the [Select Source] dialog displays, select [ScanGear CS 8.0] and click the [OK] button. or click the [File] menu and select [Acquire]. or click the [File] menu and select [Import...].
00-QSG_E_M_MAIN.fm Page 10 Wednesday, August 21, 2002 4:36 PM Try Scanning 7 Click [Scan]. The final scan will start. 8 Click or (close box) in the ScanGear CS window to close it. The scanned image will appear in the PhotoStudio window. 9 Save the scanned image. Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter a file name, select a file type (JPG format is recommended) and click [Save].
Using the Scanner Buttons You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the scanner before pressing a button. • To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoBase and Presto! PageManager (Windows)/Acrobat Reader (Macintosh) should be installed from the CanoScan Setup Utility CD-ROM.
00-QSG_E_M_MAIN.fm Page 12 Wednesday, August 21, 2002 4:36 PM Scanning Film (for CanoScan 5000F) You can scan 35 mm film (a film strip or slides) with this scanner. Positioning the Film Use the following procedures to insert the film into the film guide. 1 Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish scanning, replace the protective sheet by aligning it with the grooves in the document cover and sliding it downward into place.
Scanning Film (for CanoScan 5000F) 3 Place the loaded film guide on the scanner platen. Up to three frames in a film strip can be scanned at once. Position the film guide so that the three frames being scanned are toward the back of the platen and, as in the diagram, align the film guide with the FILM symbol on the platen. To scan the remaining frames, pivot the film guide 180°. Up to two slides can be scanned at once.
00-QSG_E_M_MAIN.fm Page 14 Wednesday, August 21, 2002 4:36 PM Scanning Film (for CanoScan 5000F) Simple Mode 3 In the [Select source] category, select [Film]. 4 In the [Film type] category, select [Nega/Sleeve] or [Posi/Sleeve]. • Only film strips can be scanned in the Simple mode. To scan slides, switch to the Advanced mode by clicking the [Advanced Mode] button on the bottom right of the window. Advanced Mode 3 Select the film type in the [Select source] category. Select an option from the following.
Scanning Film (for CanoScan 5000F) 5 Click [Preview]. 6 Place a check mark beside the number(s) of the frame(s) to be scanned and click [Scan]. At first, a check mark only appears beside the first frame. You can scan multiple frames in one step if you place check marks beside the numbers of each frame you wish to include. The scanner will start scanning the items. When the scan is complete, click the ScanGear CS close box ( (Windows) or (Macintosh)). The scanned image will appear in ArcSoft PhotoStudio.
00-QSG_E_M_MAIN.
00-QSG_E_M_MAIN.fm Page 17 Wednesday, August 21, 2002 4:36 PM English System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a safe location. • This information is also required to request a repair under warranty. Make sure you record the information and store it in a safe location.