CanoScan 8400F Quick Start Guide

Try Scanning
9
English
3 Click the [File] menu and choose [Select Source].
Select your scanner model name and click the [Select] button
for Windows or the [OK] button for Macintosh.
4 Click the Acquire icon or click the [File] menu
and select [Acquire].
ScanGear CS will start.
5 Select [Select Source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document
(Grayscale).
6 Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.
7 Select the [Destination].
You can select [Print (300 dpi)] or [Image display (150 dpi)].
When [Print (300 dpi)] is selected, the output resolution is set
to 300 dpi. When [Image display (150 dpi)] is selected, it is set
to 150 dpi.
[Print (300 dpi)] is selected in this example.
After you set this setting the first time, you
do not need to set it from the second time
onward with the same scanner.
You will need to reset this setting if you
select a different scanner or a digital
camera.
Do not open the document cover while a
scan is in progress.