Quick Start Guide

13
Scanning Film
Slides
Position the film guide for slides on the document glass (see Step 3)
and place one or more slides face down in the film guide as shown
on the right.
3
Place the film guide on the document glass of the sacnner.
Align the smaller tab on the side of the film guide with the FILM mark on the document glass of the
scanner.
4
Close the document cover.
Scanning Film
The following steps explain how to scan films with ArcSoft PhotoStudio.
• If there is a gap between the film guide and the
film, place black paper over the gap to shield it.
• Do not block the calibration slot on the film guide when you are scanning film.
Colors will not scan correctly if the calibration slot is obstructed.
Calibration Slot
1
Select [Start], [Programs] or [All
Programs], [ArcSoft PhotoStudio] and
[PhotoStudio 5].
2
Click the Acquire icon or click the
[File] menu and select [Acquire].
ScanGear CS will start.
If an error message appears, click the [File]
menu, choose [Select Source], select your
scanner model name and click the [Select]
button.
Windows
1
Double-click the [Applications (Mac OS
9)] and [PhotoStudio] folders and the
[PhotoStudio] icon.
2
Click the Acquire icon or click the
[File] menu and select [Import...].
When the [Select Source] dialog displays, select
[ScanGear CS 8.2] and click the [OK] button.
ScanGear CS will start.
Macintosh
English