CanoScan 9950F Quick Start Guide

Specifications
17
English
Specifications
*1
16 bit output supported for film scanning only.
*2
The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included.
*3
Calibration processing time is not included.
*4
Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported.
*5
AC adapter type varies according to the region in which the scanner is purchased.
• Specifications are subject to change without notice.
Upgrading to USB 2.0 (Windows Only)
To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs that have been
verified by Canon for compatibility.
Expansion Cards Hubs
• Adaptec USB2connect 5100: PCI bus Adaptec XHUB4
• Adaptec USB2connect 3100LP: PCI bus Adaptec XHUB4PLUS
• Adaptec USB2connect 2000LP: PCI bus Adaptec XHUB7PLUS
• Adaptec DuoConnect: PCI bus
For installation procedures, please read the instructions that accompany the USB expansion card/hub.
CanoScan 9950F
Scanner Type Flatbed
Scanning Element CCD 6-line color
Light Source Cold cathode fluorescent lamp
Optical Resolution 4800 x 9600 dpi
Selectable Resolution 25 - 19200 dpi (ScanGear CS)
Scanning Bit Depth
Color 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input / 16 bit
*1
or 8 bit output
Scanning Speed
*2
(Photo or Document)
Color 11.0 msec./line (2400 dpi), 11.0 msec./line (4800 dpi)
Grayscale,B&W 11.0 msec./line (2400 dpi), 11.0 msec./line (4800 dpi)
Scanning Speed
*2
(Film)
Color, GrayScale,
B&W
5.5 - 88.0 msec./line
Preview Speed
*3
Approximately 3.6 seconds
Interface
USB 2.0 Hi-Speed
*4
/ USB (USB 1.1 equivalent)
IEEE1394a (FireWire400:Macintosh only)
Maximum Document Size A4/Letter: 216 x 297 mm
Film Type (negatives/positives)
35 mm strip 30 frames
35 mm slide 12 frames
120 format (max. 6 x 22 cm) 2 strips
120 format (max. 6 x 9 cm) 1 frame
4”x 5” format
Scanner Buttons 4 buttons: COPY, SCAN, PDF, E-MAIL
Operating Range
Te m p e r a t u re
10
°C to 35°C (50°F to 95°F)
Humidity
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
Power Requirements
AC adapter (100/120/230/240 V)
*5
Power Consumption
In operation: 28 watts maximum
Stand-by: 6 watts
Power Switch Off: 0.1 watts (100V), 0.3 watts (200V)
(Using supplied AC adapter)
Maximum Exterior Dimensions 290 x 509 x 128 mm
Weight Approximately 5.8 kg