Service manual

CHAPTER 1
1 - 1 COPYRIGHT  2002 CANON INC. CANOSCAN 8000F REV.0 OCT. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
I. SPECIFICATIONS
Scanner Main Unit
Type : Flatbed image scanner
Scanning Part
Image sensor : 10,680-pixel 6-line CCD
Light source : Cold cathode fluorescent lamp
Document type : Sheet, Book
Document alignment position : Right-end corner
Max. document size : A4/Letter size (216 x 297mm)
Image output mode : Color 16-bit for RGB each
Grayscale (256 gradations)
Binary (black and white)
Optical resolution : 2400 dpi x 4800 dpi
Scanning time : 5.4ms/line (600 dpi or lower)
10.8ms/line (601 dpi or higher)
Film Scanning Part
Film type : Color and monochrome, negative and positive
Film size : 35mm sleeve (6 frames x 2)
35mm slide mount (4 frames)
Light source : Cold cathode fluorescent lamp
IR LED (for FARE function)
Scanning time : 5.4 to 172.8ms/line (automatically selected depending on
films)
Interface Part
Interface : USB connector (Universal Serial Bus 2.0)
FAU connector (6-pin)
Power connector (for AC adapter)
Front Panel
Scanner button : 4 buttons (COPY, SCAN, FILE, E-MAIL) on the scanner
unit
Others
Operating environment : Temperature : 10 to 35 degrees
Relative humidity : 10 to 90%RH
Air pressure : 613 to 1013 hPa
Power source : 100V to 120V
220V to 240V
Power consumption : 15W max. (during operation)
10W (during standby)
Dimensions : 284.0 (Width) x 498.0 (Depth) x 104.0 (Height) mm
(Height to the document glass: 72.0mm)
Weight : Approximately 4.6kg