Service manual

CHAPTER 5

5 - 13



2002 CANON INC. CANOSCAN 8000F REV.0 OCT. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)

* Scan count

Set a number from 1 to 100.

* Resolution (dpi)

When the resolution for scanning an image is selected at 75,150, 300, or 600 dpi, whole

document glass area is scanned. When selected at 1200 or 2400 dpi, 6mm forwarded

area from the reference sheet of the document glass is scanned.

* Image handling

When “Read in memory (no file)” is selected, the image is read into the memory, then

abandoned after readout. When “Save to TIFF file” is selected for handling an scanned image,

the file of “img0.tif” is saved in the folder of the Canon Scanner Test. When scan count is set

at 2 or more, the file of “img0.tif”, “img1.tif”, “img2.tif” ... are saved.

File space to be saved is as follows.

75 dpi : 1.5MB, 150 dpi : 6.5 MB, 300 dpi : 26 MB

600 dpi : 105 MB, 1200 dpi : 7.5 MB, 2400 dpi : 30 MB

Note : Confirm before scanning that the available disk space on the HDD in which the

Canon Scanner Test is installed exceeds above file space.