Service manual

CHAPTER 3

3 - 17

2001 CANON INC. CANOSCAN D1230U/D2400U REV.0 MARCH 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

Figure 3-16

2) Put the sliding rod into the drive motor and fix them with one screw.

3) Pass the drive belt through the gear on the drive motor.

4) Attach the scanning unit.

Note: When assembling, make sure to tie the cables for the drive motor and button PCB

together with four cable clamps, and attach the ferrite core. (See Figure 3-5 and 3-6)

C. Attaching the Drive Motor

1) Apply grease (EM-50L) to the gear on the drive motor as shown by arrows caring not to apply

it to the other part.