Service manual

CHAPTER 3
3 - 14
COPYRIGHT © 2000 CANON INC. CANOSCAN FB1210U REV.0 APR. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
q Drive Belt
w Motor Assembly
e Gear
1
3
2
B. Removing the Motor Assembly
1) Remove the main PCB.
2) Remove the top cover and document glass assembly.
3) Remove the carriage assembly.
4) Remove two screws from the cable cover to remove it, then cut four tie-wraps.
5) Pull the drive belt through the gear to remove it from the motor assembly.
Figure 3-13