LiDE 300 Online Manual English
Contents Using Online Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Touch-enabled Device Users (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Placing Items. . . . . .
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Scanner Connection Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Cannot Proceed beyond Scanner Connection Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Cannot Communicate with Scanner via USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual 4
Symbols Used in This Document Warning Instructions that, if ignored, could result in death, serious personal injury, or property damage caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or property damage caused by incorrect operation of the equipment. These must be observed for safe operation.
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved.
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc.
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LEADTOOLS Copyright (C) 1991-2009 LEAD Technologies, Inc.
MIT License Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. (1) Red Hat Incorporated Copyright (c) 1994-2009 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License.
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty -------------THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org --- end of FTL.TXT --The TWAIN Toolkit is distributed as is.
Placing Items Place the Item on the Platen Items You Can Place & How to Place Items 21
Place the Item on the Platen Place the item you want to scan on the platen. 1. Place the item on the platen. 1. Open the document cover. 2. Place the item on the platen with the side to scan facing down. Items You Can Place & How to Place Items Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break. • Do not place any objects weighing 4.4 lb (2.
Items You Can Place & How to Place Items The position to place an item may vary depending on the item to be scanned. Place the item in the correct position according to the item to be scanned. If you do not place the item correctly, it may not be scanned correctly. The items you can place on the platen are as follows. Property Details Document, magazine, or newspaper Types of items Size (width x height) Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) Max. 8.5 x 11.7 inches (21.6 x 29.
Placing the Item in the Center of the Platen When scanning one printed photo, postcard, business card or BD/DVD/CD Place the item at least 0.4 inch (1 cm) away from the edges of the platen, with the side to scan facing down. Portions placed on the diagonally striped area cannot be scanned. Placing Multiple Items When scanning multiple printed photos, postcards, or business cards Place the items at least 0.4 inch (1 cm) away from the edges of the platen, with the side to scan facing down.
Note • Positions of slanted items (up to approximately 10 degrees) are corrected automatically by the Skew Correction function. Slanted photos with a long edge of approximately 7.1 inches (18 cm) or more cannot be corrected. • Non-rectangular or irregular shaped photos (such as photos that have been cut to various shapes) may not be scanned correctly.
Maintenance Important • Disconnect the USB cable from the computer before cleaning the machine. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. • Never use alcohol, thinner, benzene, etc. The exterior may deform, discolor, or dissolve. With a soft dry cloth, wipe the platen (A), the inner side of the document cover (white sheet) (B), and the exterior (C).
Safety Safety Precautions Regulatory Information WEEE (EU&EEA) 27
Safety Precautions Safety Precautions • The important notice and the safety precautions that you should know are described in this manual. • Each safety standard mark and declaration is valid only for the voltage and frequency of the respective country or region where it applies. Warning • Read carefully and follow the instructions below. Ignoring the instructions may lead to fire and electric shocks. • Do not place the product close to the flammable solvents such as alcohol or thinner.
Power Supply • When unplugging the USB cable, always pull on the main body. Pulling the cable may damage the wires and lead to fire or electrical shock. • Do not apply excessive force to plug or unplug USB cable. • Do not damage or modify the USB cable. • Do not place heavy objects on, pull or excessively bend, twist or tie the USB cable. • Do not twist or tie the USB cable. • Plug the USB cable completely into the connector.
Regulatory Information Users in the U.S.A. FCC Notice (U.S.A. Only) Model Number: K10486 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WEEE (EU&EEA) Only for European Union and EEA (Norway, Iceland and Liechtenstein) This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
Ce symbole indique que ce produit ne doit pas être jeté avec les ordures ménagères, conformément à la directive DEEE (2012/19/UE) et à la réglementation de votre pays. Ce produit doit être confié au distributeur à chaque fois que vous achetez un produit neuf similaire, ou à un point de collecte mis en place par les collectivités locales pour le recyclage des Déchets des Équipements Électriques et Électroniques (DEEE).
peligrosas que normalmente están asociadas con los RAEE. Al mismo tiempo, su cooperación a la hora de desechar correctamente este producto contribuirá a la utilización eficazde los recursos naturales. Para más información sobre cómo puede eliminar el equipo para su reciclado, póngase en contacto con las autoridades locales, con las autoridades encargadas de los desechos, con un sistema de gestión RAEE autorizado o con el servicio de recogida de basuras doméstico.
Apenas para a União Europeia e AEE (Noruega, Islândia e Liechtenstein) Este símbolo indica que o produto não deve ser colocado no lixo doméstico, de acordo com a Directiva REEE (2012/19/UE) e a legislação nacional. Este produto deverá ser colocado num ponto de recolha designado, por exemplo, num local próprio autorizado quando adquirir um produto semelhante novo ou num local de recolha autorizado para reciclar resíduos de equipamentos eléctricos e electrónicos (EEE).
Αυτό το σύμβολο υποδηλώνει ότι αυτό το προϊόν δεν πρέπει να απορρίπτεται μαζί με τα οικιακά απορρίμματα, σύμφωνα με την Οδηγία σχετικά με τα Απόβλητα Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (ΑΗΗΕ) (2012/19/ΕΕ) και την εθνική σας νομοθεσία. Αυτό το προϊόν πρέπει να παραδίδεται σε καθορισμένο σημείο συλλογής, π.χ. σε μια εξουσιοδοτημένη βάση ανταλλαγής όταν αγοράζετε ένα νέο παρόμοιο προϊόν ή σε μια εξουσιοδοτημένη θέση συλλογής για την ανακύκλωση των αποβλήτων Ηλεκτρικού και Ηλεκτρονικού Εξοπλισμού (ΗΗΕ).
kierrätysjärjestelmän ylläpitäjältä ja jätehuoltoyhtiöltä. Lisätietoja sähkö- ja elektroniikkalaiteromun keräyksestä ja kierrätyksestä on osoitteessa www.canon-europe.com/weee. Endast för Europeiska unionen och EES (Norge, Island och Liechtenstein) Den här symbolen visar att produkten enligt WEEE-direktivet (2012/19/EU) och nationell lagstiftning inte får sorteras och slängas som hushållsavfall. Den här produkten ska lämnas in på en därför avsedd insamlingsplats, t.ex.
Ez a szimbólum azt jelzi, hogy a helyi törvények és a WEEE-irányelv (2012/19/EU) szerint a termék nem kezelhető háztartási hulladékként. A terméket a kijelölt nyilvános gyűjtőpontokon kell leadni, például hasonló cserekészülék vásárlásakor, illetve bármelyik, elektromos és elektronikai berendezésekből származó hulladék (WEEE) átvételére feljogosított gyűjtőponton.
k účinnému využívaniu prírodných zdrojov. Ďalšie informácie o mieste recyklácie opotrebovaných zariadení získate od miestneho úradu, úradu životného prostredia, zo schváleného plánu OEEZ alebo od spoločnosti, ktorá zaisťuje likvidáciu komunálneho odpadu. Viac informácií nájdete aj na webovej stránke: www.canon-europe.com/weee.
elektros ir elektroninės įrangos (EEĮ) atliekų perdirbimo punktą. Netinkamas tokios rūšies atliekų tvarkymas dėl elektros ir elektroninėje įrangoje esančių pavojingų medžiagų gali pakenkti aplinkai ir žmonių sveikatai. Padėdami užtikrinti tinkamą šio gaminio šalinimo tvarką, kartu prisidėsite prie veiksmingo gamtos išteklių naudojimo.
Doar pentru Uniunea Europeană şi EEA (Norvegia, Islanda şi Liechtenstein) Acest simbol indică faptul că acest produs nu trebuie aruncat o dată cu reziduurile menajere, în conformitate cu Directiva DEEE (Directiva privind deşeurile de echipamente electrice şi electronice) (2012/19/UE) şi legile naţionale.
vrstom otpada može da ima moguće negativne posledice po životnu sredinu i ljudsko zdravlje usled potencijalno opasnih materijala koji se uglavnom vezuju za EEE. U isto vreme, vaša saradnja na ispravnom odlaganju ovog proizvoda će doprineti efikasnom korišćenju prirodnih resursa. Za više informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću.
Handling Precautions Precautions for Safe Transport of Scanner Legal Limitations on Use of Your Product and Use of Images 42
Precautions for Safe Transport of Scanner When relocating the scanner, make sure of the following. Important • To ensure safe transport of the scanner, pack the scanner in a sturdy box with its bottom facing down and fill the remaining space with protective materials. • If a shipping agent is handling transport of the scanner, have its box marked "FRAGILE" or "HANDLE WITH CARE" with the bottom of the scanner facing down. 1. Disconnect the USB cable. 2.
Legal Limitations on Use of Your Product and Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Main Components A: Document Cover Presses down the placed item. B: Scanning Unit The main part of the scanner that emits light and scans items. C: Platen Place the item to be scanned. D: Alignment Mark Align a corner of the item with this mark. E: Scanner Buttons You can scan easily according to your purpose by simply pressing a button.
PDF button AUTO SCAN button COPY button SEND button F: Scanner Lock Switch Lock or unlock the scanning unit. G: USB Connector Connect the supplied USB cable. Important • There is no power switch or power lamp on the scanner. No AC adapter or power cord is required. When you connect a computer and the scanner with the USB cable and turn on the computer, the scanner also turns on. • The scanner is designed to produce optimal results when connected to a USB 3.0 or higher port with the supplied USB cable.
Specifications General Specifications Scanner type Flatbed Sensor type CIS Light source 3-color (RGB) LED Optical resolution *1 2400 x 2400 dpi Selectable resolution 25 - 19200 dpi (ScanGear) Scanning bit depth Color: 48 bit input (16 bit input for each color (RGB))/ Windows: 48 bit or 24 bit output (16 bit or 8 bit output for each color (RGB)) *2 Mac: 24 bit output (8 bit output for each color (RGB)) Grayscale: 16 bit input or 8 bit output Interface Maximum document size Scanner buttons USB2.
Windows Windows 10, Windows 8.1, Windows 7 SP1 Operating system Note: Computer with Windows 7 or later pre-installed 3.0 GB Hard disk space Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. Display XGA 1024 x 768 macOS Operating system OS X 10.11, macOS 10.12 to macOS 10.13 1.5 GB Hard disk space Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice.
Scanning from Computer (macOS) Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Scanning Tips Positioning Originals (Scanning from Computer) 49
Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Important • Available functions and settings vary depending on your scanner or printer.
IJ Scan Utility Lite Features Use IJ Scan Utility Lite to scan and save documents, photos, or other items at one time by simply clicking the corresponding icon. Important • The displayed items and available functions vary depending on your scanner or printer. Multiple Scanning Modes Auto allows for one click scanning with default settings for various items. Document will sharpen text in a document or magazine for better readability, and Photo is best suited for scanning photos.
Note • To set the applications to integrate with, see Settings Dialog.
Scanning Easily (Auto Scan) Auto Scan allows for automatic detection of the type of the item placed on the platen or ADF (Auto Document Feeder). Important • This function is not supported depending on your model. • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (selection boxes; scan areas) in the screen displayed by clicking Driver in the IJ Scan Utility Lite main screen, and then scan again.
Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder) 54
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. Save documents in formats such as PDF and JPEG, and photos in formats such as JPEG and TIFF. 1. Place the item on the platen. Positioning Originals (Scanning from Computer) 2. Start IJ Scan Utility Lite. 3. To specify the paper size, resolution, PDF settings, etc., click Settings..., and then set each item in the Settings dialog.
Scanning Tips Positioning Originals (Scanning from Computer) 56
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen or ADF (Auto Document Feeder) for scanning. If items are not placed correctly they may not be scanned correctly. Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break. • Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
of the platen and the item. Portions placed on the diagonally striped area cannot be scanned. Important • Inkjet All-In-One printer: Important • Large items (such as A4 size photos) that cannot be placed away from the edges/arrow (alignment mark) of the platen may be saved as PDF files. To save in a format other than PDF, scan by specifying the data format.
1. Make sure any original has been removed from platen. 2. Open document tray (A). 3. Slide the paper guides (B) all the way out. 4. Load document with side to scan facing up in document tray. Insert the document until it stops. 5. Adjust document guide (B) to match width of document. Do not slide the document guide too hard against the document. The document may not be fed properly. Note • When scanning duplex documents, place the front sides facing up.
2. Place the item with the side to scan facing the platen, and then align it with the alignment mark. Important • If you open the document cover wide, the scanner may fall over. • Portions placed over (A) (0.094 inch (2.4 mm) from the left edge of the platen) or (B) (0.106 inch (2.7 mm) from the front edge) cannot be scanned. 2. Gently close document cover. While scanning, hold the document cover gently with your hand to keep it closed.
• The item type may not be detected automatically. In that case, specify the item type in IJ Scan Utility and scan.
Scanning Using the Scanner Buttons What Are Scanner Buttons? Scanning and Saving Items as PDF Files (PDF Buttons) Scanning Items and Saving the Scanned Images (AUTO SCAN Button) Scanning and Printing/Copying Items (COPY Button) Scanning and Attaching Items to E-Mail (SEND Button) Scanner Button Settings (Windows) Scanner Button Settings (macOS) Scanner Button Settings via IJ Scan Utility Scanner Button Settings via IJ Scan Utility Lite 62
What Are Scanner Buttons? The four buttons on the scanner are referred to as scanner buttons. You can create PDF files, print items, send images, etc. by simply placing the item on the platen and pressing a scanner button. Important • In Windows, when you press a scanner button, a program selection screen may appear instead of IJ Scan Utility. In that case, set IJ Scan Utility as the program to start. Refer to "Scanner Button Settings (Windows)" for details.
Scanning and Saving Items as PDF Files (PDF Buttons) You can save scanned images as PDF files. 1. Place the Item on the Platen Windows: Positioning Originals (Scanning from Computer) macOS: Positioning Originals (Scanning from Computer) 2. Press PDF button. Scanning starts. The scanned images are automatically saved as PDF files.
Scanning Items and Saving the Scanned Images (AUTO SCAN Button) You can scan items by automatically detecting the item type and save them to a computer. 1. Place the Item on the Platen Windows: Positioning Originals (Scanning from Computer) macOS: Positioning Originals (Scanning from Computer) 2. Press the AUTO SCAN button. Scanning starts. Note • Scanned images are saved in the folder set for Save in in the Settings (AUTO SCAN) dialog box displayed by clicking Settings....
Troubleshooting Scanner Connection Problems Connection Scanning Problems (Windows) Scanning Problems (macOS) Scanning Installation and Download Problems Installation 66
Scanner Connection Problems Cannot Proceed beyond Scanner Connection Screen Cannot Communicate with Scanner via USB Scanner Connection Method 67
Cannot Proceed beyond Scanner Connection Screen If you cannot proceed beyond the Scanner Connection screen, check the following. Check 1 Check that the supplied USB cable is securely connected to the scanner and computer. Connect the scanner and the computer with the USB cable as shown in the illustration below. The USB connector is on the rear side of the scanner. Important • Use the supplied USB cable. • Connect the Mini-B side to the scanner. For details, see Scanner Connection Method.
Note • You can also perform the setup using the Setup CD-ROM. macOS: 1. Click Next. A screen informing that the setup is not complete appears. 2. Click No. The Creation of Shortcut to Online Manual screen appears. 3. Select Create shortcut or Do not create shortcut checkbox, and then click Next. The Installation completed successfully. screen appears. 4. Click Exit to exit setup. 5. 6. 7. 8. Disconnect USB cable. Restart your computer. Make sure that you have no application running.
Cannot Communicate with Scanner via USB Check 1 Connect the scanner and computer correctly with the supplied USB cable. The USB connector is on the rear side of the scanner as shown in the illustration below. Important • The scanner is designed to produce optimal results when connected to a USB 3.0 or higher port with the supplied USB cable. Connect the USB cable supplied with the scanner to a USB 3.0 or higher port. • The supplied USB cable is for the scanner only. It cannot be used for other devices.
Scanning Problems (macOS) Scanning Problems 71
Scanning Problems Error Message Is Displayed Scanning Does Not Start / Scanning Does Not Complete Items Cannot Be Scanned Correctly Scanner Does Not Work 72
Error Message Is Displayed Check Your scanner may be locked. If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ( ), then reconnect the USB cable. Refer to the printed manual: Getting Started for how to unlock the scanner.
Scanning Does Not Start / Scanning Does Not Complete Check Your scanner may be locked. If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ( ), then reconnect the USB cable. Refer to the printed manual: Getting Started for how to unlock the scanner.
Items Cannot Be Scanned Correctly Check Your scanner may be locked. If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ( ), then reconnect the USB cable. Refer to the printed manual: Getting Started for how to unlock the scanner.
Scanner Does Not Work Check 1 Connect the USB cable to a different USB port on the computer. Check 2 If the USB cable is connected to a USB hub, remove it from the USB hub and connect it to a USB port on the computer. Check 3 Restart the computer. Check 4 Your scanner may be locked. If IJ Scan Utility Lite or the application is running, exit it. Slide the scanner lock switch to the release position ( ), then reconnect the USB cable.
