Canon Color Image Scanner CanoScan N650U/N656U/N1220U English Getting Started Use of a shielded cable is necessary to comply with the technical requirements of the EMC Directive. Warning When you use this product, you should pay attention to the following legal issues: • Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by law and may result in criminal and/or civil liability.
How to Make Best Use of the Manuals Thank you for purchasing a CanoScan N650U/N656U/N1220U color image scanner. This Getting Started guide explains the necessary steps to connect the scanner to your computer and begin scanning. We recommend that you carefully read this entire guide to learn the proper procedures to avoid malfunctions.
Features of the CanoScan N650U/N656U/N1220U This scanner is a flatbed color scanner with an optical resolution of 600 dpi (CanoScan N650U/N656U) or 1200 dpi (CanoScan N1220U). It incorporates the following features. Simple USB Connection, No AC Adapter Required Scanner draws power via a single USB cable, dispensing with AC adapters. Connect or disconnect the cable at will even while your computer is running (a process called hot swapping). Absolutely no need for complex connection settings.
System Requirements The following requirements must be met to operate the scanner. Windows Computer: Operating System: CPU: RAM: Display: Interface: CD-ROM Drive: IBM AT/PC compatible with built-in USB ports Windows 98/Windows 2000 Professional Pentium or later 32 MB or more (64 MB or more recommended) 256 colors or more (High Color or more recommended), 800 x 600 pixels USB Required • The scanner may not operate with home-assembled or private-label PCs.
Table of Contents How to Make Best Use of the Manuals ............................................................... 2 Features of the CanoScan N650U/N656U/N1220U .............................................. 3 System Requirements ............................................................................................ 4 Safety Precautions ................................................................................................. 7 Setup and Operating Conditions ..................................
Appendices Before Transporting the Scanner ................................................ 62 Care and Maintenance ................................................................. 63 Major Specifications ..................................................................... 64 System Information ...................................................................... 65 Conventions Used in the Guide Important information is indicated by the following symbols.
Safety Precautions Please read and take the following precautions before using the equipment. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the equipment safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons or damage to property if not performed correctly. In order to use the equipment safely, always pay attention to these cautions.
About the Power Supply WARNING • Do not damage, mutilate or modify the USB cable. Do not place heavy objects on, pull or excessively bend the USB cable. Damaged wires may cause fire or electrical shock. • Do not twist or tie the USB cable together. Fire or electrical shock may result. • Always plug the USB cable in all the way. If it is not plugged in completely, fire or electrical shock may result. General Handling Precautions WARNING • Do not take apart or modify the equipment.
Setup and Operating Conditions In order to use this scanner safely, please obey the following warnings at all times. • Please use in an area where the following temperature and humidity conditions can be met. Surrounding temperature: 5 degrees - 35 degrees C (41 degrees - 95 degrees F) Surrounding humidity: 10% - 90% RH (without condensations) • Make certain there is plenty of clear space arounf the scanner. (Below is a diagram looking straight down on the scanner) Approx. 20 cm (8 in) Approx.
CHAPTER 1 Setting Up the Scanner Do not immediately connect the scanner to the computer after removing it from the package. First inspect the package contents and then release the lock that protected the scanner during transport. Failure to release the lock may damage the scanner. 1. Inspecting the Package Contents ............................................ 11 2. Components Guide ................................................................... 12 3. Unlock the Scanning Unit .........................
1. Inspecting the Package Contents After opening the box, inspect its contents. Scanner Unit and Accessories Scanner Unit USB interface cable Connects the scanner to a computer or USB device. Software and Documents Contains the scanning software, software manuals and reader software for the manuals. It is a hybrid CD-ROM containing both Windows and Macintosh versions of the software. Since it contains vital information and software that cannot be redistributed, store it in a safe place.
2.
3. Unlock the Scanning Unit The scanner is shipped with the scanning unit locked to prevent damage during transport. You must unlock it to use the scanner. • Make sure to unlock the scanner before plugging the USB cable into the computer’s USB port. If left locked, a malfunction or problems may occur. ○ ○ 2. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Peel off the seal at the front of the scanner.
CHAPTER 2 Using the Windows Platform Users of Macintosh computers should skip to Chapter 3, Using the Macintosh Platform, on page 32. This chapter explains the procedures for using the scanner with Windows 98. To use the scanner with the Windows platform, read the instructions in this chapter to first connect it to a computer, then install the driver software and finally install the bundled application programs.
1. Connecting to the Computer With the Windows platform, the first step is to connect the scanner to the computer. Please position the scanner in a safe and stable location as described in Setup and Operating Conditions (p. 9). ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Confirm that the power switches for the computer and other connected devices are off. If the power is on, shut down the computer and peripheral devices in that order.
• The scanner is powered directly by the USB port. The USB port must provide a power supply of 500 mA. If you plug the scanner into the USB port on a keyboard or other USB device, the scanner may not be properly detected by the computer. Attach the scanner directly to a USB port on the computer or to a 500 mA self-powered USB hub. • The scanner does not have a power switch. The power is activated as soon as the computer is turned on. This concludes the connection procedure.
2. Installing the Driver Software • You only have to install the driver software once, when the scanner is connected to the computer for the first time. If the installation is canceled midway or if the procedures in this guide are not followed exactly, you will not be able to reinstall the driver software or use the scanner. Ensure that you follow the exact procedures described in this guide.
○ 4. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 5. Confirm that the [Search for the best driver for your device.] option is selected and click the [Next] button. 6. Place the CanoScan Setup Utility CD-ROM in the computer’s drive. 7.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Browse...] button. 9. Navigate in the CD-ROM drive (D:, E:, F: etc.) and find the [Scangear] folder. Select the [English] folder within it and click the [OK] button. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 10. Click the [Next] button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 11. When [CanoScan N650U/N656U] or [CanoScan N1220U] appears, click the [Next] button. The required files will copy onto your hard drive. • If you are prompted to insert the Windows 98 CD-ROM during installation, follow the instructions on the next page. DO NOT PRESS THE [CANCEL] BUTTON. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 12.
What to Do if the Windows 98 CD-ROM Is Required ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [OK] button on the dialog to close it. The Copying Files dialog will display. ○ 2. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Browse] button. ○ 3.
3. Installing the Application Software After you have installed the driver software (ScanGear CS-U), you can continue by installing the application software programs. List of Software to be Installed The following software programs will be installed onto your computer. (The number followed by an MB [Approx. 00 MB] refers to the amount of free space required to install the program on your computer’s hard drive.) • ScanGear Toolbox CS Approx.
Installation Procedures ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Remove the CanoScan Setup Utility CD-ROM from the drive once and replace it again. After a moment, the CanoScan Setup Utility will start and display its language selection window to allow you to select a language. After you select a language the following window will automatically display.
○ 3. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Start Installation] button at the bottom right of the window. This will start the installation of all the application software. You can, however, control which programs are installed by clicking the check box beside the name of a program and deleting the [√] check mark before clicking the [Start Installation] button.
• Manually install the software if the CanoScan Setup Utility menu window does not display and you cannot follow the prescribed installation procedures. Click the [Start] button, select [Run] and type one of the command lines below into the box. [D:] is an example of a CD-ROM drive name. To install ScanGear Toolbox CS: [D:\Toolbox\English\Disk1\Setup.exe] To install PhotoStudio 2000: [D:\Pstudio\Setup.exe] To install PhotoBase: [D:\Pbase\Setup.exe] To install Caere OmniPage Pro: [D:\Omnipage\English\Setup.
4. Testing the Scanner Operation The following instructions show you how to test the scanner and experiment with two software programs. You will use ScanGear Toolbox CS and ScanGear CS-U. • The ScanGear CS-U driver software can also be called a TWAIN driver. It cannot be started by itself. It has to be operated from an application program such as PhotoStudio 2000 or ScanGear Toolbox CS. For details, please read What is a TWAIN Driver? (p. 47) Starting ScanGear Toolbox CS ○ 1.
Starting ScanGear CS-U ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Save] button on the toolbar. Previewing the Image The preview scan is a quick trial scan used to confirm the positioning, size and coloring of the item. Place an item on the scanner and preview the image approximately as it will be scanned. If required, the item can be repositioned or the scanning settings changed to obtain an optimal image. ○ 1.
• Calibration is an adjustment process (taking approximately 1 minute) that allows the scanner to select the correct white balance for reproducing the colors of the scanned item. It will commence when the scanner is connected or used for the first time. • Do not lift the document cover while calibration is in process. Specifying the Scan Area ○ 1.
Performing the Final Scan ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Scan] button. English The scanner will start the final scan. The progress bar will show how the scan is progressing. The scan will finish when the progress bar reaches 100%. The ScanGear CS-U window will close. • Never lift the document cover during the scanning process.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 3. Double-click the [My Documents] folder. 4. Double-click the [My Pictures] folder. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Proceed to Step 5 if there is no “My Pictures” folder. ○ 5. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Double-click the [Save0000] file.
Precautions for Scanning at High Resolutions Please note that file sizes increase almost exponentially as the resolution is raised when scanning in color mode. Scanning at high resolutions may require more time for scanning and image processing. You are recommended to avoid raising the resolution beyond the minimum requirement to scan in color mode.
CHAPTER 3 Using the Macintosh Platform Windows users should read Chapter 2, Using the Windows Platform, on page 14. To use the scanner with a Macintosh, follow the instructions in this chapter to first install the software and then connect the scanner to the computer. If you are using the scanner with an unaltered first-generation iMac (Bondi blue iMac), you will need to update the firmware and system and possibly upgrade the Mac OS.
1. Installing the Software List of Software to be Installed The following software programs will be installed onto your computer. (The number followed by an MB [Approx. 00 MB] refers to the amount of free space required to install the program on your computer’s hard drive.) • Canon Plug-in Module CS-U Approx. 5 MB The plug-in software required to scan images into your computer. One copy of the plug-in is required for each graphics application program.
Installation Procedures • Install the software first before connecting the scanner to the Macintosh computer. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 1. Please have the CanoScan Setup Utility CD-ROM handy. 2. Make sure that the scanner is not connected to the computer.
○ 5. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Install the Software] button. The install window will display. A brief description of each program will appear when the cursor rolls over its name. ○ 6. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Start Installation] button at the bottom right of the window.
○ 7. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Proceed with the installation by following the onscreen instructions. After all the software programs have been installed, restart the computer as prompted by the on-screen instruction. ○ 8. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Remove the CanoScan Setup Utility CD-ROM from the drive.
2. Connecting to the Computer Now that the software has been installed, you may connect the scanner to the computer. Please position the scanner in a safe and stable location as described in Setup and Operating Conditions (p. 9). ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Confirm that the scanning unit has been unlocked (p. 13). English 1. • Make sure to unlock the scanner before plugging the USB cable into the computer’s USB port.
○ 2. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Connect the scanner to the computer with the supplied USB cable. The computer end of the cable has a wide flat connector while the scanner end has a small square connector. wide flat connector USB Interface Cable small square connector • The scanner is powered directly by the USB port. The USB port must provide a power supply of 500 mA.
3. Testing the Scanner Operation The following instructions show you how to test the scanner and experiment with two software programs, an application program and a plug-in. You will use CanoScan Toolbox CS and Canon Plug-in Module CS-U. • Canon Plug-in Module CS-U is a plug-in module and cannot be started by itself. It has to be operated from an application program such as PhotoStudio 2000 or CanoScan Toolbox CS. For details, please read What is a Plug-In ? (p. 49). Starting CanoScan Toolbox CS ○ 1.
Starting Canon Plug-in Module CS-U ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Scan] button on the toolbar. Canon Plug-in Module CS-U will display. Previewing the Image The preview scan is a quick trial scan used to confirm the positioning, size and coloring of the item. Place an item on the scanner and preview the image approximately as it will be scanned.
• Calibration is an adjustment process (taking approximately 1 minute) that allows the scanner to select the correct white balance for reproducing the colors of the scanned item. It will commence when the scanner is connected or used for the first time. • Do not lift the document cover while calibration is in process. Specifying the Scan Area ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click a corner of the image area you wish to scan.
Performing the Final Scan ○ 1. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Click the [Scan] button. The scanner will start the final scan. The progress bar will show how the scan is progressing. The scanned image will display in the CanoScan Toolbox CS image editing window. • Never lift the document cover during the scanning process. ○ 2.
○ 3. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Input a file name, specify a save location and file format, and click the [Save] button. This saves the file in the specified folder. The preceding steps introduced you to the basic scanning procedures. Once you have mastered them, you will be ready to tackle more challenging scanning tasks.
Precautions for Scanning at High Resolutions Please note that file sizes increase almost exponentially as the resolution is raised when scanning in color mode. Scanning at high resolutions may require more time for scanning and image processing. You are recommended to avoid raising the resolution beyond the minimum requirement to scan in color mode.
CHAPTER 4 Guide to the Software This chapter contains introductions to the bundled software programs and instructions for the electronic manuals. ................................................... 46 2. Using Canon Plug-in Module CS-U ............................ 48 3. Scanning with ScanGear Toolbox CS ......................... 50 4. Scanning with CanoScan Toolbox CS ......................... 54 5. Scanning with ArcSoft PhotoStudio 2000 6. Scanning with ArcSoft PhotoBase 7.
1. Using ScanGear CS-U ScanGear CS-U is the specialized driver for Windows that allows you to scan and load images from the scanner. It cannot be used as a stand-alone program. And must be started within an application program. It is also called a TWAIN driver (see the next page for information about TWAIN drivers). Window in the Simple Mode All you need do is select the Image Type to scan immediately at the optimal settings.
ScanGear CS-U Features • Scan with the optimal settings just by selecting an image type to suit your purposes in the Simple Mode • Adjust various settings, such as the color mode, resolution, color balance and brightness, in the Advanced Mode • Initiate various functions with the single press of a toolbar button • See the image clearly in the large, easy-to-see preview area How to Use ScanGear CS-U Starting ScanGear CS-U Select ScanGear CS-U as a TWAIN driver from ScanGear Toolbox CS, PhotoStudio 2000, Pho
2. Using Canon Plug-in Module CS-U Canon Plug-in Module CS-U is the specialized Macintosh driver that allows you to scan and load images from the scanner. It cannot be used as a stand-alone program and must be started from within an application program. It is also called a plug-in module (see the next page for information about plug-in modules). Tool Buttons Edit images easily with the zoom, rotate, tone adjustment, auto tone adjustment and browser buttons. Preview Area Displays the preview image.
Canon Plug-in Module CS-U Features • Designed with an ergonomic control panel for effective access to all functions • Supports a large, easy-to-view preview area that adjusts to the size (resolution) of your display • Supports ColorSync color matching for consistent colors between the scanner, display and printer • Displays details of the scanned image prior to scanning for accurate checks with the browser function • Provides full-featured tone adjustment with the histogram, tone curve, brightness and contr
3. Scanning with ScanGear Toolbox CS ScanGear Toolbox CS is a convenient program that works with the start button at the front of the scanner to scan images, copy (print), attach images to email messages or faxes, or save images in a few simple steps. You can also preset it to perform functions just by pressing the scanner’s start button.
How to Use ScanGear Toolbox CS Starting ScanGear Toolbox CS Press the start button at the front of the scanner. How to Use the Functions Click a button on the toolbar. How to View the Electronic Manual Place the CD-ROM in the drive, click [View the Electronic Manuals] and click [ScanGear Toolbox CS]. For details, please read Viewing Electronic Manuals with Adobe Acrobat Reader (p. 59).
ScanGear Toolbox CS Settings You can make scanning simpler by setting ScanGear Toolbox CS in the following way. This example shows PhotoStudio 2000 being used without displaying the ScanGear CS-U window. The scan can be performed simply by pressing the start button at the front of the scanner. To Scan without Displaying the ScanGear CS-U Window 1 Click the [Settings] button on the toolbar to display the ScanGear Toolbox CS Settings dialog. 2 Click the [Custom1] tab.
To Scan Simply by Pressing the Scanner’s Start Button To set ScanGear Toolbox CS to start scanning when the start button is pushed, perform the following steps in addition to the 5 steps above. 1 Click the [Settings] button on the toolbar to display the ScanGear Toolbox CS Settings dialog again. English 2 Click the [Prefs] tab. 3 Select [Custom1] in the “When Scanner Push Button pressed” field. 4 Click the [OK] button.
4. Scanning with CanoScan Toolbox CS CanoScan Toolbox CS is a convenient program that works with the scanner’s start button to scan or edit images, create or edit albums, copy (print), or attach images to faxes. When it is linked to image editing programs such as PhotoStudio 2000, you can start the application and open an image file just by dragging and dropping an image from an album onto the program icon.
5. Scanning with ArcSoft PhotoStudio 2000 ArcSoft PhotoStudio 2000 is an image editing program that can be used to load images from scanners and digital cameras and process them with editing, retouching tools, special effects and enhancements. Apply Special Effects Scan Stitch Starting PhotoStudio 2000 and the Driver Software Windows 1. Click the Windows [Start] button and select [Programs], [ArcSoft PhotoStudio 2000] and [PhotoStudio 2000]. PhotoStudio 2000 will start. 2.
6. Scanning with ArcSoft PhotoBase PhotoBase is an image database program that can create and edit image albums, perform image searches and create slide shows. It also handles sound and video files. The Windows version can prepare images for pasting into web sites or send images as attachments for email. Create Albums Paste Images into Web Pages (Windows) How to Use PhotoBase Starting ArcSoft PhotoBase and the Driver Software Windows 1.
7. Scanning with Caere OmniPage Caere OmniPage Pro (Windows) / SE (Macintosh) is an optical character recognition (OCR) program that converts scanned words into text data that can be edited with word processors. Windows Macintosh • Converting words scanned from a book, magazine, newspaper or fax into text data for editing or digital transmission.
Macintosh 1. Open the [OmniPage 8 SE Folder] folder and double-click the [OmniPage 8 SE] icon. OmniPage SE will start. 2. Click the [Scan Image] button on the toolbar, or open the [Process] menu and select [Scan Image]. Canon Plug-in Module CS-U will start and display its control panel. 3. Select [Black & White] as the scan mode and [OCR(300dpi)], [OCR(400dpi)] or [OCR(600dpi)] as the output device. Click the [Scan] button. The scanned image will display in OmniPage Pro.
8. Viewing Electronic Manuals with Adobe Acrobat Reader The CanoScan Setup Utility CD-ROM contains the following electronic manuals.
○ 3. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Select the manual you wish to view. Adobe Acrobat Reader will automatically start and display the manual. Navigate through the manual using the program’s menus and buttons. The diagram below explains the minimum necessary functions required to view an electronic manual.
APPENDICES Before Transporting the Scanner ................................................ 62 Care and Maintenance ................................................................. 63 System Information ...................................................................... 65 English Major Specifications .....................................................................
Before Transporting the Scanner Always lock the scanning unit by pushing the lock switch toward the lock mark before moving or transporting the scanner. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 1. Disconnect the USB cable from the computer. 2. Confirm that the scanning unit is at the front of the scanner.
Care and Maintenance Clean off the dirt and dust that adheres to the exterior, document glass and document cover of the scanner during the course of ordinary operation using the following procedures. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Detach the USB interface cable from the computer. 2. Dampen a clean, soft cloth with water and wring the cloth well. Use the well-wrung cloth to gently remove dirt and dust.
Major Specifications CanoScan N650U / CanoScan N656U / CanoScan N1220U Scanner Type Flatbed (stationary document type) Scanning Element CIS (contact image sensor) Light Source 3-color (RGB) LED Optical Resolution 600 x 1200 dpi (CanoScan N650U/N656U) 1200 x 2400 dpi (CanoScan N1220U) Selectable Resolution 25 - 9600 dpi (ScanGear CS-U) Scanning Bit Depth Color 14 bit input/8 bit output for each color (RGB) 25 - 9600 dpi (Canon Plug-in Module CS-U) Grayscale Scanning Speed* 1 14 bit input/8 bit
System Information This form is used to record the operating environment of the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Please make sure to record this and secure it safely. • When a repair is needed, warranty information is required. Please make sure to record this information and secure it carefully. • The replacement parts for this equipment have an expiration date of seven years after production ceases.
Caution: 1. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Canon Inc. 2. The equipment and software described in this guide are subject to change without notice. 3. Notwithstanding the considerable care taken in preparing this guide, please note that Canon Inc. does not accept liability for any results arising from the operation of the equipment or software mentioned herein. 4.
