ENGLISH DIGITAL CAMERA Camera User Guide © 2004 CANON INC. PRINTED IN JAPAN Camera User Guide CDI-E151-010 XXXXXXX z Please read the Read This First section (p. 4). z Please also see the Software Starter Guide and the Direct Print User Guide.
Disclaimer z While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. z Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
About this Camera User Guide Flowchart and Reference Guides This Guide Shooting with the Camera Software Starter Guide Installing the Software This Guide Symbols Used Icons under title bars show the operations mode. As in the example below, the mode dial should be set to , , , , , , , , , , or . Using the Flash Shooting Mode Dial Connecting the Camera to a Computer This Guide Software Starter Guide Downloading Images to a Computer This mark denotes issues that may affect the camera's operation.
Table of Contents Items marked with are lists or charts that summarize camera functions or procedures. Read This First Chapter 1. Preparing the Camera Components Guide. . . . . . . . . . . . . . . . . . . . . . . . . 10 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the Battery Pack/CF Card . . . . . . . . . . . . 14 Formatting a CF Card . . . . . . . . . . . . . . . . . . . . 19 Turning the Power On/Off. . . . . . . . . . . . . . . . . . . .
Selecting an AF Frame . . . . . . . . . . . . . . . . . . 76 Switching between Light Metering Modes . . . . 78 Adjusting the Exposure . . . . . . . . . . . . . . . . . . . . . 80 Adjusting the Tone (White Balance) . . . . . . . . . . . 81 Changing the ISO Speed. . . . . . . . . . . . . . . . . . . . 84 Changing the Photo Effect. . . . . . . . . . . . . . . . . . . 85 Auto Exposure Bracketing (AEB Mode) . . . . . . . . 86 Focus Bracketing (Focus-BKT Mode) . . . . . . . . . .
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely highprecision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
Warnings zDo not aim the camera directly into the sun or at other intense light sources which could damage your eyesight. zDo not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. zStore this equipment out of the reach of children and infants. Accidental damage to the camera or battery by a child could result in serious injury.
zRemove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire. zDo not cut, damage, alter or place heavy items on the power cord.
CAUTIONS zAvoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the battery to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the battery. zDo not store the equipment in humid or dusty areas.
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.
1. Preparing the Camera Components Guide Optical Viewfinder Window Attaching the Wrist Strap* Lens Cover Self-timer Lamp p. 53 AF-assist Beam p. 32 Red-eye Reduction Lamp p. 39 Flash p. 38 Wrist Strap Mount Microphone DC Coupler Cable Cover p. 149 Lens CF Card Slot / Battery Cover p. 15 * Avoid waving the camera about or catching it on other items when suspending it from the strap. 10 1.
The following cables are used to connect the camera to a computer or printer. Computer: Interface Cable IFC-400PCU (supplied with the camera) Direct Print Compatible Printers (Sold Separately): zCP Printers: Interface Cable IFC-400PCU (supplied with the camera) or the Direct Interface Cable DIF100 (supplied with the printer). zBubble Jet Printers • Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide.
Controls Viewfinder p. 32 FUNC. (Function) Button p. 63 (Flash)/ (Index) Button p. 38, 44 MF (Manual Focus)/ (Single Image Erase) Button p. 46, 98 (Macro)/JUMP Button p. 45, 52 Speaker A/V OUT (Audio/Video Out) Terminal p. 125 Shutter Button p. 31 Zoom Button Shooting: (Wide Angle)/ (Telephoto) p. 30, 54 Playback: (Zoom out)/ (Zoom in) p. 43, 44 (Playback) Button p. 22 (Print/Share) Button p.
Creative Zone Image Zone Shooting Mode Dial Use the mode dial to switch between the Shooting modes. z : Auto p. 30 The camera automatically selects settings. z Image Zone p. 48 The camera automatically selects settings according to the image composition type. : Portrait : Landscape : Night Scene : Fast Shutter : Slow Shutter : Stitch Assist p. 50 : Movie p. 58 z Creative Zone p. 72 The user selects exposure, aperture or other settings to achieve special effects.
Installing the Battery Pack/CF Card Install the supplied Battery Pack NB-2LH and CF card in the camera to get ready for shooting. When your camera is first used or the "Change the battery pack" message is displayed, charge the battery pack. zWhen the upper indicator blinks green, the camera is writing, reading, erasing or transmitting an image to or from the card. Do not perform the following or image data may be lost or corrupted: - Do not shake the camera.
battery charger and plug it into a power outlet. * Battery charger model names and types vary by region. (For CB-2LT and CB-2LTE) z The charge indicator will light red while the battery pack is charging. It will change to a steady green when the charge is complete. z After charging, promptly unplug the battery charger and remove the battery. b Battery Lock a aBe sure that the camera power is off (p. 21). Slide the CF card slot / battery cover in the direction of the arrow and open the cover.
a Label CF Card Eject Button aInsert the CF card with its label facing towards you and close the CF card slot / battery cover. z Push the card in until the CF card eject button fully extends. To remove the CF card, push the CF card eject button and pull the card out. 16 1.
Battery Pack Handling Precautions z Keep the battery pack and camera terminals ( ) clean at all times. Dirty terminals may cause a poor contact between the battery pack and camera. Polish the terminals with a tissue or a dry cloth before charging or using the battery pack. z Do not cover the battery charger with anything, such as a tablecloth, cushion or blanket, when it is charging. Heat will build up internally and possibly lead to fire.
in the camera at least once a year before returning it to storage. z The camera consumes the battery charge when the power is on even when a function is not being used. To conserve the battery charge, be particularly attentive in turning the camera off. z Although the battery pack's maximum operating range is 0 to 40 °C (32 to 104 °F), the optimal range is 10 to 30 °C (50 to 86 °F).
z Place the CF card in the supplied case for storage. z Do not use or store CF cards in the following types of locations. - Locations subject to dust or sand - Locations subject to high humidity and high temperatures Microdrives are a recording medium with a hard disk. Their merits are a large capacity and a low price per megabyte of capacity. However, they can be more susceptible to vibrations and shocks than CF cards, which use durable flash memories.
Indicator b c a b aTurn the power on (p. 21). bPress the MENU button, and then the X arrow on the omni selector. The [ (Set up)] menu appears. cSelect [Format] using the S or T arrow on the omni selector, then press the SET button. 20 1. Preparing the Camera aSelect [OK] using the W or X arrow on the omni selector, then press the SET button. The upper indicator blinks green, and formatting starts. Wait until the indicator goes off.
Turning the Power On/Off The power/mode indicator remains lit while the power of the camera is on. The power/mode indicator indicates the state of the camera as follows. Orange: Shooting mode Green: Playback mode/Printer connection mode* Yellow: Computer connection mode* Off: The power of the camera is off. * For printer connection mode, see the Direct Print User Guide. For computer connection mode, see the Software Starter Guide.
Turning On the Camera in Playback Mode a b aPress the (Playback) button. When the power is turned on, the power/mode indicator lights green. bPress the (Playback) button again to turn the power off. 22 1. Preparing the Camera Switching between Shooting and Playback You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or deleting an image immediately after it is shot. Shooting Mode Playback Mode Press the (Playback) button (p.
Switching between Shooting Mode and Playback Mode Power Off Press the (Playback) button. Open/Close the lens cover. Open the lens cover. Shooting Mode Press the (Playback) button. Press the shutter button halfway. Playback Mode Close the lens cover. 1.
Setting the Date/Time The first time the camera power is turned on or whenever the built-in rechargeable lithium battery charge is low, start from Step . b You may need to reset the date and time if the battery pack is removed for about three weeks. Setting the date and time settings does not cause the date/time stamp to appear on images. For printing images with the date on them, refer to the Direct Print User Guide or Software Starter Guide.
a a b aSelect [Date/Time] using the S or T arrow on the omni selector, then press the SET button. aSet the date and time and press the SET button. z Select the item you wish to set using W or X and set its value using the S or T arrow on the omni selector. z The date can be set up to the year 2030. bPress the MENU button. 1.
Setting the Language a a b b c b e.g. PowerShot S70 aTurn the power on (p. 21). bPress the MENU button, and then the X arrow on the omni selector. The [ (Set up)] menu appears. z In Playback mode, you can change the language by holding the SET button while you press the JUMP button. This function cannot be used during movie playback or during a printer connection. 26 1. Preparing the Camera aSelect [Language] using the S or T arrow on the omni selector, then press the SET button.
Using the LCD Monitor Pressing the DISPLAY button switches the LCD monitor display mode. Shooting Mode On (No Information) On (Information View) The combined optical zoom and digital zoom factor displays. Off Shutter Speed MF Indicator AF Frame Spot Metering Frame Aperture Value • Still images:Shots Remaining • Movies (seconds): - Remaining Movie Time - Elapsed Time About the AF Frame Green: Focusing Complete Yellow: Focusing Difficulty *The AF frame does not appear when it is set to Auto.
Shooting Modes Exposure Compensation AE Lock/FE Lock Light Metering Mode White Balance (WB)*4 -2 – +2 Detailed Display Standard Display Icon No Information Function Information View Shooting Playback Mode Mode { –*1 {*2 – { – {*3 – { { – – Reference Page Display Contents p. 48, 72 p. 80 p. 89, 90 { – { – p. 78 { – { – p. 81 Drive Mode { – – – ISO Speed { – { – p. 53, 56, 145 p. 84 Flash Output { – { – p.
*3 *4 *5 *6 The value for each content also appears. The icon does not display in Shooting mode. PowerShot S70 only Zoom powers reflect the combined optical and digital zoom effects. "3.6x" is the telephoto-end setting of the optical zoom. The following information may also appear with some image files. An audio file other than a wave file, or a file with an unrecognized format, is attached. JPEG file with format not conforming to Design rule for Camera File System Standards.
Auto Mode 2. Shooting-The Basics a a Zoom Indicator b c aOpen the lens cover. bSet the shooting mode dial to Wide angle Telephoto . The power/mode indicator lights orange. z When the lens cover has been opened and the power/mode indicator is lit green, the camera is in the Playback mode. Press the button or press the shutter button halfway to switch to the Shooting mode. cIf the LCD monitor is not displaying, press the DISPLAY button to turn it on. 30 2.
z The angle of view can be adjusted within the 28 to 100 mm range, in 35mm film equivalent. z The combined use of the digital zoom and optical zoom enables magnified shooting up to approx. 15x (p. 54). The digital zoom cannot be used with some shooting modes (p. 174). Images become coarser the more they are digitally zoomed. b a aLightly press the shutter button halfway to focus. Two beeps will sound when the camera has finished focusing, and the AF frame on the monitor appears green.
See page 174 for settings that can be changed in this mode. Images are first saved into the camera's internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. The upper indicator blinks green while data is recorded onto the CF card. The beep and shutter sound can be set to [On]/ [Off] using the menu (p. 68). Shots cannot be taken while the flash is charging.
Reviewing an Image Right after Shooting due to the physical separation between the viewfinder and lens. This is called the parallax phenomenon and is more noticeable the closer the subject is to the lens. In some cases, portions of images shot up close that appear in the viewfinder will not appear in the recorded image. Please use the LCD monitor to shoot images up close.
Changing the Image Display Duration b a c bSelect [Review] using the S or T arrow on the omni selector and select a duration setting using the W or X arrow on the omni selector. Off: Images do not display 2 to 10 sec.: Images appear for the time selected even if the shutter button is released. cPress the MENU button. z Another picture can be taken by pressing the shutter button even while an image is displayed. Changing the Recording Format Right after Shooting aTurn the power on (p.
Changing the Resolution and Compression Shooting Mode Dial a b You can change the resolution, and compression (still images). To record the CCD output without compression, select the RAW file format (p. 57). Still Images PowerShot S70 Resolution Purpose Pixels 3072 x 2304 High zPrint A4 size* 210 x 297 mm (8.3 x 11.7 in.) or larger prints zPrint letter size* 216 x 279 mm M1 (Medium 1) 2592 x 1944 (8.5 x 11 in.) or larger prints zPrint A4 size* 210 x 297 mm (8.3 x 11.7 in.
PowerShot S60 Movies Resolution Display Pixels High zPrint A4 size* 210 x 297 mm (8.3 x 11.7 in.) or larger prints zPrint letter size* 216 x 279 mm (8.5 x 11 in.) or larger prints zPrint A4 size* 210 x 297 mm (8.3 x 11.7 in.) prints M1 (Medium 1) 2048 x 1536 zPrint letter size* 216 x 279 mm (8.5 x 11 in.) prints zPrint postcard size 148 x 100 mm (6 x 4 in.) prints M2 (Medium 2) 1600 x 1200 zPrint L size 119 x 89 mm (4.7 x 3.5 in.
cSelect the resolution you wish to set using the W or X arrow on the omni selector, then press the SET button. a b aSelect the compression you wish to set using the W or X arrow on the omni selector. z You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot. z See Image File Sizes (Estimated) (p. 159). z Types of CF cards and number of shots remaining (p. 157). bPress the FUNC. button and shoot the image. 2.
Using the Flash Shooting Mode Dial a Use the flash according to the guidelines below. The flash fires automatically as required by Auto with redthe lighting level, and the red-eye reduction eye reduction lamp fires each time the main flash fires. The flash fires automatically as required by Auto the lighting level. Flash on with The red-eye reduction lamp and the flash red-eye always fire. reduction Flash on The flash always fires. Flash off The flash does not fire.
Setting the Red-eye Reduction Function Shooting Mode Dial The red-eye reduction lamp fires when the flash is used in dark areas. This reduces light reflecting back from the eyes and making them appear red. b c a c bSelect [Red-eye] using the S or T arrow on the omni selector. cSelect [On] using the W or X arrow on the omni selector and press the MENU button. z appears on the LCD monitor if it is set to Information View display.
b c a c aPower the camera in Shooting mode (p. 21) and press the MENU button. The [ (Rec.)] menu appears. bSelect [Slow Synchro] using the S or T arrow on the omni selector. cSelect [On] using the W or X arrow on the omni selector and press the MENU button. 40 2. Shooting-The Basics When shooting with a high ISO sensitivity and using the built-in flash, there is more of a chance of overexposure the closer you are to the subject.
The flash may take up to approximately 10 seconds to charge in some cases. Actual times will vary according to usage and the battery charge. The flash exposure and the flash output can be changed (p. 92). When shooting with [Slow Synchro] set to [On], camera shake may become a factor. We recommend the use of a tripod. The flash setting is saved when the camera is turned off in the , , and shooting modes. 2.
3. Playback-The Basics Displaying Images Individually a b aPress the button. The last recorded image appears on the LCD monitor. bMove between images using the W or X arrow on the omni selector. z Use W to move to the previous image and X to move to the next. Holding W or X moves more rapidly between images, but the images will not appear as clearly. z You can also switch images by pressing the JUMP button (p. 45). z Press the DISPLAY button to show the data for the displayed image (p. 27).
Magnifying Images b a Magnified approximately 5 times Magnified approximately 10 times Approximate position Approximate position aPress the Each time this is pressed, the magnification will change as follows: approx. 2.5x J approx. 5x J approx. 10x. z You can move around the magnified image using the W, X, S or T arrow on the omni selector. z Movie frames and index playback images cannot be magnified.
Viewing Images in Sets of Nine (Index Playback) b b a a Movie Frame aPress the button. bPress the button. z Nine images appear at once (index playback). z You can switch to index playback by pressing the button. Pressing the S arrow in this row displays the previous set of nine images. Pressing the T arrow in this row displays the next set of nine images. aChange the image selection using the W, X, S or T arrow on the omni selector.
JUMP Jumping Between Images a c b z Single Image Playback: The 10th image ahead or behind is displayed. z Index Playback: The previous or next 9 images are displayed. cPress the JUMP button. The jump bar disappears and the camera reverts to single image playback or index playback. z Pressing the zoom button’s while in index playback also clears the jump bar Jump Bar aPress the JUMP button while in single image playback (p. 42) or index playback (p. 44). The jump bar appears.
Erasing Images Individually 4. Erasing Please note that erased images cannot be recovered. Exercise caution before erasing a file. a b b c aPress the button. The last recorded image appears on the LCD monitor. bSelect the image you wish to erase using the W or X arrow on the omni selector and press the button. 46 4. Erasing cSelect [Erase] using the W or X arrow on the omni selector and press the SET button. z To cancel instead of erasing, select [Cancel].
Erasing All Images Please note that erased images cannot be recovered. Exercise caution before erasing a file. a b c a bSelect [Erase all] using the S or T arrow on the omni selector, then press the SET button. cSelect [OK] using the W or X arrow on the omni selector, then press the SET button. z To cancel instead of erasing, select [Cancel]. The [Erase all] function erases all the image data recorded on the CF card. Protected images cannot be erased with the erase function (p. 108).
5. Useful Shooting Functions Using the Shooting Mode Dial (Image Zone) Settings fitting the shooting conditions of your subject can easily be set using the mode dial. Landscape Portrait Movie (p. 58) Use this mode to shoot movies. Sound is also recorded simultaneously. Use this mode to shoot landscape scenes. Stitch Assist (p. 50) Use this mode when you want the subject to appear sharp and the background to blur.
z Shooting procedures are the same as for the mode (p. 30). a See page 174 for settings that can be changed in each shooting mode. Important points for each function are shown below. b d c aPower the camera in Shooting mode (p. 21). The [ (Rec.)] menu appears. bTurn the shooting mode dial and set it to the desired function as shown above. cUse the zoom button to achieve the desired composition (relative to subject size).
Shooting Panoramic Images (Stitch Assist) Use this mode to shoot a series of overlapping frames for merging (stitching) into a large panoramic image using a computer. Please use the bundled PhotoStitch program to merge the images on a computer. 50 5. Useful Shooting Functions Framing a Subject PhotoStitch detects the overlapping portions of adjoining images and merges them. When composing shots, try to include a distinctive item (landmark, etc.) in the overlapping portions.
To shoot close-ups, slide the camera over the subject, keeping it parallel as you move. b Shooting Images can be shot in the following 5 sequences in Stitch Assist mode. a Horizontally, left to right Horizontally, right to left Vertically, bottom to top Vertically, top to bottom Clockwise starting at the top left See page 174 for settings that can be changed in this mode. A custom white balance setting (p. 81) cannot be set in mode.
Macro Mode Shooting Mode Dial a Sequence Sequence c aCompose and shoot the second image so that it overlaps the first. z Minor discrepancies in the overlap can be corrected with the software. z An image can be retaken. Press the W, X, S or T arrow on the omni selector to return to that frame. z A maximum of 26 images can be recorded either horizontally or vertically. bUse the same procedures to shoot the remaining frames. cPress the SET button after the last shot. 52 5.
Using the Self-timer b Shooting Mode Dial a aPress the DISPLAY button to turn the LCD monitor on. bPress the button. b c a c z The icon appears on the LCD monitor. z Press the button again to cancel the macro mode. aPress the FUNC. button. bSelect * (Drive mode) using the S or T arrow on the omni selector. * The current setting is displayed. 5.
Digital Zoom cSelect or using the W or X arrow on the omni selector, then press the FUNC. button. z When the self-timer is set to ( ), the shutter activates 10 (2) seconds after the shutter button is pressed fully. z When is selected, the self-timer sounds and the self-timer lamp starts blinking when the shutter button is pressed all the way. The blinking gets faster two seconds before the shutter activates. z When is selected, the self-timer lamp blinks fast from the beginning.
dPress the zoom button's shoot the image. c and d b aTurn the shooting mode dial to any Shooting mode except for or . bPress the MENU button to display the [ (Rec.)] menu. cSelect [Digital Zoom] using the S or T arrow, select [On] using the W or X arrow on the omni selector and press the MENU button. 5.
Continuous Shooting Shooting Mode Dial Use this mode to shoot successive frames while the shutter button is fully pressed. a b c Use this mode to view the images Standard Continuous as you shoot continuously. The Shooting shutter interval is longer in this mode than in mode. Use this mode to shoot continuously High Speed with a short shutter interval. You Continuous Shooting cannot check images while shooting continuously. The interval between shots may lengthen when the internal memory becomes full.
Changing the File Format Shooting Mode Dial a b aPress the shutter button halfway to lock the focus. bPress the shutter button all the way to shoot. z Shooting will stop when the shutter button is released. z The shooting speed is as follows.* PowerShot S70 When is selected: Approx. 1.2 shots per second When is selected: Approx. 2.0 shots per second PowerShot S60 When is selected: Approx. 1.5 shots per second When is selected: Approx. 2.
Movie Mode b c a d b a e.g. PowerShot S70 aPress the FUNC. button. bSelect L* (3072 x 2304 or 2592 x 1944) using the S or T arrow on the omni selector. * The current setting is displayed. cSelect RAW using the W or X arrow on the omni selector. z You can shoot the image right after selecting settings by pressing the shutter button. The resolution screen will appear again, once the image is shot. dPress the FUNC. button. 58 5. Useful Shooting Functions aTurn the shooting mode dial to .
The maximum movie length has been determined according to standard Canon testing conditions. The maximum length may vary according to the subject of your movie and other ambient conditions. The clip will end automatically after this time elapses or when the CF card becomes full. zBe careful not to touch the microphone while shooting. zIf the upper indicator blinks green after a shot, this indicates that the movie is being written to the CF card. You cannot shoot again until it stops blinking.
Viewing/Editing Movies You can play back movies recorded with the Movie mode and delete unwanted portions from the beginning or the end of movie clips. zProtected movies cannot be edited (p. 108). zIt may take approximately 3 minutes to save an edited movie. If the battery pack runs out of charge partway through, edited movie clips cannot be saved. When editing movies, use a fully charged battery pack or the AC Adapter Kit ACK700 (sold separately). 60 5.
Playback Operations ST:Adjusts the volume during playback SET: Pauses playback. Press again to resume playback. a Movie Playback Panel aSelect a button from the movie playback panel using the W or X arrow on the omni selector, then press the SET button.
Movie Editing Panel c–e a–e cSelect using the S or T arrow and press the SET button. Movie Editing Bar aSelect a button from the movie editing panel using the S or T arrow on the omni selector, then press the SET button.
Selecting Menus and Settings 6. Shooting-Advanced Functions Selecting Settings by Pressing the FUNC. Button (Only in Shooting Mode) Select a function item using S or T Exposure Compensation (± 0) p. 80 Select setting contents using W or X Bracket ( ) p. 86 Flash Adjust (± 0) p. 92 Flash Output p. 92 White Balance ( ) p. 81 Resolution (L) p. 35 Select the Shooting mode (p. 21). Drive mode ( Press the FUNC. button. Press the S or T arrow to select a function item. ISO Speed ( ) p.
Selecting Settings by Pressing the MENU Button Press the MENU button. Press the W or X arrow to switch between menu tabs. Press the S or T arrow to select a menu item. (Depending on the function, press the SET button after making a selection.) Press the W or X arrow to select setting contents. (Depending on the function, press the SET button after making a selection.) Press the MENU button. Shooting Rec.
Set up Menu Rec. Menu My Camera Menu Play Menu (p. 113) 6.
Some menu items may not be available for selection according to the shooting mode (p. 174). You can apply a desired image and sound to and in the My Camera menu. For details, see Registering the My Camera Settings (p. 114) or the Software Starter Guide. Camera settings can be reset to the default values (p. 71). Rec. Menu Menu Item Flash Sync Slow Synchro Flash Adjust Red-eye Wireless Delay Spot AE Point * Default setting 66 6.
Menu Item Safety Shift MF-Point Zoom AF-assist Beam Digital Zoom Review Setting content Adjusts the settings so that the exposure will be appropriate when the shooting mode dial is set to or and a shutter speed or aperture value has been set. On/Off* Sets whether or not the focusing point is magnified when using the manual focus. On*/Off Sets whether or not the AF-assist Beam is activated as needed when using the autofocus.
Play Menu Menu Item Protect Rotate Erase all Slide Show Print Order Transfer Order 68 Set up Menu Setting content Protects images from accidental erasure. Rotates images 90 or 270 degrees clockwise in the display. Erases all images from a CF card (excluding protected images). Plays images in an automated slide show. Sets the images that will be printed on a direct print compatible printer or at a photo lab service, the number of copies and other parameters.
Menu Item Setting content Adjusts the sound volume when a ePlayback Vol. movie or sound memo is played. Settings of Above Items (a - e) Off 1 2* 3 4 5 Sets the brightness level of the LCD LCD Brightness monitor. (Normal)*/ (Bright) Sets whether or not the camera automatically powers down or the LCD monitor goes off after a specified period of time elapses without camera operation. Power Saving Auto Power Down On*/Off Display Off 10 sec./20 sec./30sec./1 min.*/2 min./3 min.
My Camera Menu Menu Item You can select the theme, start-up image and sound, operation sound, selftimer sound and shutter sound used on this camera. These are called My Camera settings. You can also customize the and options for each item with images from the CF card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details. Menu Item Setting content Selects a common theme for each My Camera settings item.
Resetting the Settings to Default You can reset the menu and button operation settings to default. 1 3 3 2 1 Open the lens cover or press the button to power up the camera. 2 Press the MENU button for longer than 5 seconds. The message "Reset settings to default?" appears on the LCD monitor. z The normal screen resumes when resetting is complete. z To cancel resetting, select [Cancel] instead of [OK].
Using the Mode Dial (Creative Zone) 2 Turn the shooting Shooting Mode Dial You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes. After settings are made, shooting procedures are the same as for the mode (p. 30). How to Use the Mode Dial 2 mode dial, select the function you wish to use and shoot the image.
z The shutter speed and aperture value will show in red on the LCD monitor when the correct exposure cannot be obtained. z When the flash fires, the shutter speed and aperture value will show in white (for all shooting modes except ). z The combinations of shutter speeds and aperture values can be changed within the same exposure setting (p. 73-p. 75). See page 174 for settings that can be changed in this mode. For information on the relation between the aperture value and shutter speed, see page 74.
z Adjust the shutter speed using the W or X arrow when the image is underexposed (insufficient light) or overexposed (too much light) and the correct exposure cannot be obtained. z The nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images.
z Adjust the aperture value using the W or X arrow when the image is underexposed (insufficient light) or overexposed (too much light) and the correct exposure cannot be obtained. z Some aperture values cannot be selected depending on the zoom position. z In this mode, the maximum shutter speed with synchronized flash is 1/250 second. The aperture value setting may therefore be changed automatically to match the synchronized flash speed even if its value was set previously.
Selecting an AF Frame When the flash fires, the settings will be automatically adjusted even if Safety Shift has been turned off. The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following way. z For selecting AiAF (auto selection) or a center-point AF frame, see below. z See Setting an AF Frame Manually (p. 77). Shooting Mode Dial You can set the AF frame to Auto Selection (AiAF) or to center-point.
The AF frame appears in green on the LCD monitor. 2 Select the auto selection or centerpoint AF frame using the S, T, W or X arrow on the omni selector. Setting an AF Frame Manually Shooting Mode Dial You can move the AF frame manually to the desired position. This is convenient for focusing accurately on your chosen subject to obtain the composition you desire. 1 Press the button. The AF frame appears in green on the LCD monitor. e.g. Auto Selection 3 Press the e.g. Center-point button.
Switching between Light Metering Modes 3 Press the button. z You can immediately shoot the image using the selected AF frame by pressing the shutter button instead of pressing button. z The AF frame will move back to its original position (Center), if you hold down the button. Turn the LCD monitor on to set the AF frame to the position you desire before shooting. The AF frame is locked to center-point when using the digital zoom or when an image is shot using the viewfinder with the LCD monitor off.
2 In the [ 3 2, 3 1 (Rec.)] menu, select [Spot AE Point]. z See Selecting Menus and Settings (p. 63). 3 Select [Center] or 1 Press the button to select a metering mode. z Each press of the button changes the metering mode as follows. (Evaluative) (Center-Weighted Averaging) (Spot AE Point) [AF Point] using the W or X arrow, then press the MENU button. z When [Spot AE point] e.g.
Adjusting the Exposure Shooting Mode Dial Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. * The current setting is displayed. z The settings can be adjusted in 1/3-stops in the range of -2 stops to +2 stops. z You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.
Adjusting the Tone (White Balance) Shooting Mode Dial Underwater When the white balance mode is set to match the light source, the camera reproduces colors more accurately. Custom Combinations of setting contents and light source are as follows.
z Please see page 82 regarding the custom setting. z You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot. z Shooting with a peculiar source of light (such as a mercury-vapor lamp) 3 Press the FUNC. button. The white balance cannot be adjusted when the photo effect is set to (Sepia) or (B/W) (p. 85).
3 Aim the camera at a white paper or cloth, or gray card and press the SET button. The white balance data is recorded. z Aim the camera so that the white paper or cloth, or gray card, completely fills the center of the frame. z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 4 Press the FUNC. button.
Changing the ISO Speed 2 Select Shooting Mode Dial By raising the ISO speed, you can shoot bright images even in poor lighting conditions. This function is convenient when you want to prevent camera shake, shoot without the flash or shoot with a faster shutter speed in dark conditions. You can choose from the following speeds: Auto, 50, 100, 200 and 400. * (ISO Speed) using the S or T arrow and select the desired setting using the W or X arrow. * The current setting is displayed.
Changing the Photo Effect Shooting Mode Dial By setting a photo effect before you shoot, you can change the look and feel of the pictures you take. Photo Effect Off Low Sharpening Emphasizes the contrast and color saturation to record in bold color. Tones down the contrast and color saturation to record neutral hues. Records subjects with softened outlines. Sepia Records in sepia tones. B/W Records in black and white. Custom Effect* You can freely set the contrast, sharpness and color saturation.
Auto Exposure Bracketing (AEB Mode) z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. Contrast z This function allows you to adjust the degree of brightness. z Select from - (Weak), 0 (Neutral) and + (Strong). Sharpness z This function allows you to adjust how sharply outlines are defined. z Select from - (Weak), 0 (Neutral) and + (Strong).
Focus Bracketing (Focus-BKT Mode) 2 Select * (BKTOff) using the S or T arrow. * The current setting is displayed. 3 Select (AEB), press the SET button and adjust the compensation range using the W or X arrow. z Use X to expand the range and W to contract it. z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.
2 Select * (BKTOff) using the S or T arrow, select (Focus-BKT) using the W or X arrow and press the SET button. * The current setting is displayed. 3 Select a range using the W or X arrow. z Use X to expand the range and W to contract it. z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 4 Press the FUNC. button and shoot the image with the manual focus (p. 98). 88 6.
Locking the Exposure Setting (AE Lock) z See Selecting an AF Frame (p. 76) z See Switching between Light Metering Modes (p. 78) Shooting Mode Dial You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. You must set the flash to . The AE lock cannot be set if the flash fires. 1, 2 2 While pressing the shutter button halfway, press the button.
Locking the Flash Exposure Setting (FE Lock) 2. Focus on the subject on which you wish to lock the exposure and press the shutter button halfway. 3. Press the button. The exposure setting will lock and the icon will appear in the LCD monitor. 4. Press the W or X arrow until the desired shutter speed or aperture value is reached. 5. Recompose the image and shoot. The setting will cancel after the shot is taken.
Switching between Flash Adjustment Settings 3 While pressing the shutter button halfway, press the Shooting Mode Dial button. z The flash exposure compensation setting locks (FE Lock) and the icon appears on the LCD monitor. z The flash will fire a pre-flash and lock the flash exposure to the required intensity to illuminate the subject. z Each time you press the button, the flash fires a pre-flash and exposure locks at the required intensity for that composition.
Setting the Flash Adjustment/Flash Output Shooting Mode Dial Flash Adjust zWhen [Flash Adjust] is set to [Auto], settings can be adjusted in 1/3-stop increments in the range of -2 stops to +2 stops. zYou can enjoy flash photography with exposure adjustments with the combined use of the camera’s exposure compensation function. Flash Output zIn M mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps when shooting.
Switching the Timing at which the Flash Fires Shooting Mode Dial 1, 2 The flash fires right after the shutter opens, 1st-curtain regardless of the shutter speed. Usually, the 1stcurtain is used when shooting. The flash fires right before the shutter closes, regardless of the shutter speed. Compared with the 2nd-curtain 1st-curtain, the flash fires later and this allows you to shoot images in which, for example, a car's rear lamps seem to trail off behind. 1, 2 1 From the [ (Rec.
Shooting Images at Set Intervals (Intervalometer) 1 Select Shooting Mode Dial You can shoot images at a set interval. This function can be used for fixed-point observation of plants and blooming flowers. The shooting interval time can be set from 1 to 60 minutes and 2 to 100 images can be shot. Since the camera may shoot continuously for an extended period of time, the use of the AC Adapter Kit ACK700 (sold separately) is recommended (p. 148). 5 1, 2, 3 1, 4 1 94 6.
* In some cases, the actual maximum number of shots may be fewer than the displayed number. 4 Press the SET button. z The camera exits the menu screen and Int. appears at the lower right of the LCD monitor. 5 Press the shutter button. z The first image is shot and the interval shooting session starts. z Once the set number of shots is taken the camera automatically powers down regardless of the power saving function settings.
Shooting Problem Subjects for the Autofocus The autofocus may not work well on the following types of subjects. z Subjects with extremely low contrast to the surroundings z Subjects mixing close and far objects z Subjects with extremely bright objects at the center of the composition z Subjects that are moving quickly z When shooting through glass, get as close as possible to avoid reflection off the glass.
z Pressing the MF button a second time cancels the manual focus mode. Shooting in AF Lock Mode Shooting Mode Dial 3 Recompose the image and press the shutter button all the way to shoot the image. 1 2, 3 2 1 Aim the AF frame at an object at a AF lock is convenient because you can let go of the shutter button to recompose the image. In addition, since the focus stays locked to the same position even after the shot is taken, you can immediately shoot the next image with the same focus position.
Shooting in Manual Focus Mode Shooting Mode Dial The focus can be manually set. 2 1 1 z When the [ (Rec.)] menu's [MF-Point Zoom] is set to [On], the portion of the image in that frame will appear magnified.*1 * Except in the , when the digital zoom is activated or a TV is used as the display. *1Can also be set so that the image displayed is not magnified (p. 67). z The MF indicator shows approximate figures. Use them as a shooting guideline only.
Using the Manual Focus in Combination with the Auto Focus Shooting Mode Dial The camera automatically searches for a more suitable focusing point from the current manually focused location. 3 Press the shutter button all the way to shoot the image. You cannot change the AF frame setting while focusing manually. Cancel the manual focus mode, then change the AF frame setting. You can change the MF indicator displayed distance units (p. 69). 3 1 1 2 1 Focus the camera with the manual focus.
Saving Custom Settings Shooting Mode Dial 1 You can save frequently used shooting modes and various shooting settings to the (Custom) mode. When necessary, you can then shoot images with previously saved settings by simply turning the shooting mode dial to . Settings that are usually forgotten when the shooting mode is changed or when the power is turned off (such as Continuous Shooting and Self-timer mode) are also remembered. 3, 4 3, 5 1 Turn the shooting mode dial to , , or , .
3 Select [Save Settings] from the [ (Rec.)] menu and press the SET button. z See Selecting Menus and Settings (p. 63). 4 Select [OK] and press the SET button. 5 Press the MENU button. The setting contents do not influence other shooting modes. Saved settings can be reset (p. 71). 6.
7. Playback-Advanced Functions Rotating Images in the Display Images can be rotated 90° and 270° clockwise on the LCD monitor. Original 90° 270° 2 Select an image you want to rotate using the W or X arrow and press the SET button. z The image cycles to the next orientation (90° 270° original) each time the SET button is pressed. 3 Press the MENU button. 1, 2 1, 2 1, 3 1 Select [Rotate] from the [ (Play)] menu and press the SET button. z See Selecting Menus and Settings (p. 63). 102 7.
Attaching Sound Memos to Images In Playback mode (including single image playback, index playback, magnified playback and the review immediately after shooting in Shooting mode) you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in WAVE format. 2 1 2 1 Press the button while playing back images. z The Sound Memo panel appears. 2 Select and the time remaining are displayed. Speak towards the microphone of the camera. z To stop recording, press the SET button.
Automated Playback (Slide Show) zYou cannot attach sound memos to movies. zYou cannot record or playback sound memos for images that already have an incompatible sound file attached. If you attempt to record or play such images, the "Incompatible WAVE format" message will display. Incompatible sound files can be deleted with this camera. zSound memos for protected images cannot be erased (p. 108). Slide show image settings are based on DPOF standards (p. 127).
2 Select [Program] using the S or T arrow and select between [All images] or one of [Show 1]-[Show 3] using the W or X arrow. 3 Select [Start] using the S or T arrow and press the SET button. The show will start and automatically stop when the show is done. Pausing and Resuming a Slide Show z Press the SET button to pause the show. Press it again to resume. Fast Forward/Rewinding a Slide Show z User the W or X arrow to move to the previous or next image.
1 Display the slide show menu (p. 104). 2 Select [Program] using the S or T arrow and select [Show 1], [Show 2] or [Show 3] using the W or X arrow. z A checkmark (3) will appear beside a show already containing images. 3 Choose [Select] using the S, T, W or X arrow and press the SET button. 4 Mark images to include in the show. Single Image Playback z Move between images using the W or X arrow and mark or remove marks from images using the S or T arrow. 106 7.
Adjusting the Play Time and Repeat Settings Play Time Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 seconds, 15 seconds, 30 seconds and Manual. Repeat Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped. 2, 3, 4 2 1, 5 1 Display the slide show menu (p. 104). 2 Select [Set up] using the W or X arrow and press the SET button. 3 Select [Play Time] or [Repeat] using the S or T arrow.
Protecting Images You can protect important images from accidental erasure. 2 1, 2 1, 2 1, 3 1 In the [ (Play)] menu, select [Protect] and press the SET button. z See Selecting Menus and Settings (p. 63). 2 Select an image you want to protect using the W or X arrow and press the SET button. 108 7. Playback-Advanced Functions z The icon appears on protected images. z To remove the protection, press the SET button again (in protection mode).
Setting the Power Saving Function This camera is equipped with a power saving function. Depending on the power saving setting (p. 69), the camera may power down or the LCD monitor may go off automatically. z Auto Power Down [On]: [Off]: zShooting mode Powers down approximately 3 minutes after the last time a camera control is accessed. The LCD monitor automatically shuts off approximately 1 minute*1 after the last time a camera control is accessed even if [Auto Power Down] is set to [Off].
3 Select [Display Off] using the S or T 1, 2, 3 1 1, 4 1 Select [Power Saving] in the [ (Set up)] menu and press the SET button. z See Selecting Menus and Settings (p. 63). 2 Select [Auto Power Down] using the S or T arrow and select [On] or [Off] using the W or X arrow. 110 8. Camera Settings 4 arrow and select a time using the W or X arrow. Press the MENU button.
Setting the Auto Rotate Function 2 Select [On] using the W or X arrow Shooting Mode Dial and press the MENU button. This camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct viewing orientation in the display. You can turn this function on/off.
Resetting the File Numbers When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be "up" and the lower end to be "down". It then regulates the optimal white balance and exposure for vertical photography. This function operates regardless of the On/Off status of the Auto Rotate function. The images you shoot are automatically assigned a file number. You can select the way those file numbers are assigned.
Customizing the Camera (My Camera Settings) 1 In the [ (Set up)] menu, select [File No. Reset]. z See Selecting Menus and Settings (p. 63). 2 Select [On] using My Camera allows you to customize the startup image and sound, operation, self-timer and shutter sounds. Each menu item has three choices. Changing My Camera Settings the W or X arrow and press the MENU button. Setting the [File No. Reset] to [Off] is useful for avoiding file name duplication when images are downloaded to a computer.
2 Select a menu item using the S or T This function registers new contents to the and options. : Off : General : Science fiction theme : Animal theme z The contents of the and changed (p. 70). Images recorded onto the CF card and newly recorded sounds can be added to the camera. You can also use the supplied software to upload your computer's images and sounds to the camera. The following menu items can be saved to the camera. options can be 3 Press the MENU button.
The start-up image screen or the sound recording menu appears 1 2, 3, 5 5 2 4 1 Press the 2 button to switch to the Playback mode (p. 22). Press the MENU button and press the X arrow twice. The [ (My Camera)] menu appears. 3 Select the menu item you wish to register using the S or T arrow and select or using the W or X arrow. appears. 4 Press the DISPLAY button. Registering a Start-up Image z Select the image you wish to register using the W or X arrow and press the SET button.
zThe following cannot be registered as My Camera settings. - RAW images - Movies - Sound recorded using the Sound Memo function (p. 103) zWhen you register new My Camera settings, the previously registered settings are erased. File Format of My Camera Settings My Camera settings should conform to the below file formats.
Downloading Images to a Computer The following methods can be used to download images recorded by the camera to a computer. Some methods are not applicable to all operating systems. Also, depending on the camera, which operating systems are supported may vary. Be sure to check Computer System Requirements beforehand (p. 118).
Connecting the Camera to a Computer PowerShot S60 Computer System Requirements Please install and use the software on a computer which meets the requirements below. OS z Windows Computer Model PowerShot S70 OS Computer Model CPU RAM Interface Free Hard Disk Space Display 118 Windows 98 Second Edition (SE) only Windows Me Windows 2000 Service Pack 4 only Windows XP (Including Service Pack 1) The above OS should be pre-installed on computers with built-in USB ports.
z Macintosh PowerShot S70 OS Computer Model CPU RAM Interface Free Hard Disk Space Display Mac OS X (v10.1.5 ~ v10.3) The above OS should be preinstalled on computers with built-in USB ports. PowerPC G3/G4/G5 256 MB or more USB zCanon Utilities ImageBrowser: 200 MB or more PhotoStitch: 40 MB or more 1,024 x 768 pixels/32,000 colors or better is required PowerShot S60 OS Computer Model CPU RAM Interface Free Hard Disk Space Display Mac OS 9.0 - 9.2, Mac OS X (v10.1/v10.2/v10.
1 Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk (prior to first connection only). z Please see the Software Starter Guide for the installation procedures. z With a Macintosh, it is next necessary to set the ImageBrowser auto start settings (only with PowerShot S70). Please see the Software Starter Guide. 2 Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal. USB port Interface cable 120 9.
3 Select [Canon CameraWindow] in the events dialog that appears on the computer and click [OK] (first time only). e.g. PowerShot S70 In the case of PowerShot S70 If the events dialog fails to appear, click the [Start] menu, followed by [Programs] or [All Programs], [Canon Utilities], [CameraWindow] and [CameraWindow]. The window shown left will display. 9.
In the case of PowerShot S60 If the events dialog fails to appear, click the [Start] menu, followed by [Programs] or [All Programs], [Canon Utilities], [CameraWindow] and [CameraWindow - Set Auto-Launch]. Click [Set] in the [CameraWindow-Set Auto-Launch] window (first time only). The window shown left will display. z Using the software and computer to download images: JSee the Software Starter Guide.
1 Use the supplied interface cable to 2 connect the computer's USB port to the camera's DIGITAL terminal. (See step 2 on p. 120.) Confirm that the Direct Transfer menu is displayed on the camera's LCD monitor. z The button will Direct Transfer Menu light blue. z Press the MENU button if the Direct Transfer menu fails to appear. All Images/New Images/DPOF Trans. Images 3 Use S or T to select , or and press the button. z To cancel the transfer, press the SET button.
During the downloading of images with [All Images], [New Images] or [DPOF Trans. Images], the button does not blink blue. The option selected with the button is retained even when the camera's power is shut off. The previous setting will be in effect the next time the Direct Transfer menu is displayed. The image selection screen will appear directly when the Select and Transfer or the Wallpaper option was last selected.
Viewing Images on a TV Set z Refer to your card adapter's or card reader's manual for information regarding the connection between the computer and card adapter or card reader. 2 Double-click the icon of the drive with the CF card. z Depending on the operating system, a window opens automatically. A video-compatible television connected via the supplied AV Cable AVC-DC300 can be used to view images as you shoot or play back them. 1 Turn off the camera (p. 21) and the TV.
4 Turn on the TV and switch it to Video mode. 5 Power the camera into Shooting mode or Playback mode (p. 21). z The image will appear on the TV. Shoot or play back images as usual. No image will appear on the LCD monitor when the camera is connected to a TV monitor. The video output signal can be switched (NTSC or PAL) to accommodate different regional standards. The default setting will vary between regions. NTSC: Japan, U.S.A., Canada, Taiwan, etc. PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
About Printing There are two ways of printing images shot with this camera. z You can easily print images stored in the CF card by connecting the camera to a direct print compatible button. printer*1 with a cable and then pressing the camera’s z You can specify the images on your CF card you want to print and how many copies you want (DPOF*2 Print Settings), and then take the CF card to a participating photo lab that supports DPOF to have them printed out later.
Print settings (DPOF Print Settings) (p. 129) Image Transmission Settings (DPOF Transfer Order) (p. 134) Direct Print Compatible Printers Direct Print Compatible Printing - For details, see the Direct Print user Guide. - Also, refer to your printer's manual. Photo Lab zCP Printer zBubble Jet Printer zNon-Canon PictBridge compliant printers 128 9.
Print Settings (DPOF Print Settings) You can select images on a CF card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. Refer to the Direct Print User Guide for instructions on how to select print settings from the printer. zThe mark may appear on images that have had print marks set by another DPOF compliant camera.
3 Select images for printing. Single Images z When the print type Number of copies (p. 131) is set to [Standard] or [Both], select an image using the W or X arrow. You can set the number of copies (up to 99) to be printed using the S or T arrow. z When the print type (p. 131) is set to [Index], select an image using the W or X arrow and mark or remove marks from images using the S or T arrow. A check mark appears on the marked image.
4 Press the MENU button. The selection mode will turn off and the Print Order menu will reappear. Images are printed in order from oldest to newest by the shooting date. A maximum of 998 images can be marked per CF card. When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed).
3 Select [Print 1, 2, 3 1, 2 1, 4 1 In the [ (Play)] menu, select [Print Order] and press the SET button. z See Selecting Menus and Settings (p. 63). 2 Select [Set up] using the W or X arrow and press the SET button. 132 9. Additional Features Type], [Date] or [File No.] using the S or T arrow and select settings using the W or X arrow. Print Type z Select [Standard], [Index] or [Both]. Date z Select [On] or [Off]. File No. z Select [On] or [Off]. 4 Press the MENU button.
zWhen [Print Type] is set to [Index], the [Date] and [File No.] cannot be set to [On] at the same time. zIf [Print Type] is set to [Both] or [Standard], both [Date] and [File No.] can be set to [On], however, the items that can be printed will vary depending on the printer used. Resetting the Print Settings The print settings can all be removed at once. The print type is reset to [Standard] and the date and file number options are set to [Off].
Image Transmission Settings (DPOF Transfer Order) 2 Select [Reset] using the W or X arrow and press the SET button. 3 Select [OK] using the W or X arrow and press the SET button. You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. However, if you are using a PowerShot S60 with Mac OS X, images marked for transfer cannot be transferred to the computer together in one batch.
Selecting Images for Transferring 3 1, 2, 3 1, 2, 3 1, 4 1 In the [ (Play)] menu, select [Transfer Order] and press the SET button. z See Selecting Menus and Settings (p. 63). 2 Select [Order] using the W or X arrow and press the SET button. z To cancel the image transfer settings, select [Reset] instead. 3 Select images for transferring. Single Images z Select an images using the W or X arrow and mark or remove marks from images using the S or T arrow. A check mark (3) appears on the marked image.
z Press the SET button and select [Mark all] using the S or T arrow, then press the SET button again to select all the images. z If you select [Clear all] instead or [Mark all], you cam remove marks from all the images. z You can select images using the W or X arrow and change the settings using the S or T arrow after [Mark all] or [Clear all] has been selected. 4 Press the MENU button. The selection mode will turn off and the Transfer Order menu will reappear.
List of Messages Appendix The following messages may appear on the LCD monitor. z For messages which may appear when a printer is connected, refer to the Direct Print User Guide. Busy... Image is being recorded to, or read from, CF card. Resetting all the camera and menu settings to default No memory card You turned on the power without a CF card installed. Cannot record! You attempted to shoot an image without a CF card installed. Memory card error! CF card has experienced an anomaly.
Cannot rotate You attempted to rotate a movie or an image that was photographed with another camera, recorded in a different format, or edited on a computer. Unidentified Image You attempted to play back an image that was recorded in a special format (proprietary format used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera. Incompatible WAVE format Cannot attach sound memos to the image because the image has some sound file recorded in an inappropriate format.
Troubleshooting Problem Cause Camera will not operate Power is not turned on. CF card slot / battery cover opened. Insufficient battery voltage. Camera will not record Poor contact between camera and battery terminals. Camera is in Playback or computer/printer connection mode. Solution Turn on the camera. See Turning the Power On/Off (p. 21) Confirm that the CF card slot cover and battery cover are securely closed. zFully charge the battery, then put it in the camera. zUse the Compact Power Adapter.
Problem Cannot play back Cause Solution You attempted to play back images shot with In some cases you may be able to play back the image if you upload another camera or images edited on a computer. it to your camera using the bundled software (ZoomBrowser EX or Image Browser). See the ZoomBrowser EX/ImageBrowser Software User Guide (PDF). File name was changed with a computer or file Set the file name or location to the file format/structure of the location was changed. camera.
Problem Image is blurred or out of focus Cause Camera moved. Autofocus function hampered by obstruction to AF auxiliary light emitter. AF-assist Beam is set to off. Subject out of focal range. Subject is hard to focus on. Subject in recorded image is too dark Insufficient light for shooting. Subject dark in comparison to the background. Subject in recorded image is too dark Subject too far for flash to reach. Solution zBe careful not to move the camera when pressing the shutter button.
Problem Subject recorded in image is too bright Cause Solution Subject too close causing flash to be too bright. Adjust the flash output with the flash exposure compensation function (p. 92). Subject bright in comparison to the background. zSet the exposure compensation to a negative (-) setting. zUse the AE lock or spot metering function. See Locking the Exposure Setting (AE Lock)(p. 89) and Switching between Light Metering Modes (p. 78).
Problem CF card image reading is slow Recording images on the CF card takes too long Cause Solution Currently used CF card has been formatted in a Use a CF card formatted with this camera. different device. See Formatting a CF Card (p. 19).
Using the Wireless Controller (Sold Separately) Installing the Battery Install the battery (CR2025) into the Wireless Controller WL-DC100 (sold separately) before use. Removing the Battery To remove the date battery, pull it in the direction of the arrow. Warning Be particularly careful to keep the battery out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall.
Shooting Playback Press the FUNC. button on the camera. Using the S or T arrows, select * (drive mode). Using the W or X arrows, select (remote control). Press the FUNC. button, then shoot the image. * The current setting is displayed. zPress the shutter button. The camera will shoot the image after the time set in [Wireless Delay] in the Rec. menu has elapsed (0 seconds, 2 seconds or 10 seconds). zEach press of this button switches the information view mode between No Information and Information View.
Using Conversion Lenses (Sold Separately) The camera supports use of the separately sold Teleconverter TC-DC10. In order to attach this lens, you also need to use the separately sold Conversion Lens Adapter LA-DC10. Warning z When attaching the tele-converter, be sure to screw it on securely. If they come loose, they may fall from the lens adapter, posing risk of injury from shattered glass.
3 Move in the direction of the arrow and insert it into the viewfinder until it clicks into place. z To remove the conversion lens adapter, follow the above steps in reverse order. 4 Turn the teleconverter in the direction of the arrow to attach it. zWhen attached to the camera, do not carry the camera by the conversion lens adapter or the teleconverter. The camera could detach, fall and break.
Using the Power Kits (Sold Separately) To turn off the power for a short time such as between shooting sessions, leave the conversion lens attached and lightly press the lens cover. If you will not be using the camera for a long time, remove the conversion lens and close the lens cover. AC Adapter Kit You are advised to use AC Adapter Kit ACK700* (optional) for long periods of use and when connecting to a computer or printer.
2 Connect the DC plug of the compact power adapter cable to the DC Coupler DR-700 terminal. DC Coupler DR-700 3 Open the CF card slot/battery cover, then insert the DC Coupler until it is locked. 4 Press and hold the DC Coupler cable cover using the cable, then close the CF card slot/battery cover. DC Coupler Cable Cover z Always disconnect the power cord from the power supply after use. zAlways turn the camera’s power off before connecting or disconnecting the compact power adapter (p. 21).
Using a Car Battery Charger (Sold Separately) Car Battery Charger CBC-NB2 (sold separately) can be used to charge battery packs from an automobile's cigarette lighter socket. Always ensure that the automobile’s engine is running when you use the car battery charger. Use of it with the engine off may flatten the battery in some automobiles. Always unplug the car battery charger before turning off the engine.
Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Camera body Lens Viewfinder LCD Monitor : Wipe the body clean with a soft cloth or eyeglass lens wiper. : First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. zNever use synthetic cleansers on the camera body or lens.
Specifications All data is based on Canon's testing standard. Subject to change without notice. PowerShot S70/PowerShot S60 Camera Effective Pixels Image Sensor Lens Digital Zoom Optical Viewfinder LCD Monitor AF System Shooting Distance (from the front of the lens) Shutter Shutter Speeds Light Metering System Exposure Control System 152 Appendix PowerShot S70: Approx. 7.1 million PowerShot S60: Approx. 5.0 million PowerShot S70: 1/1.8-inch CCD (Total number of pixels: Approx. 7.
Exposure Compensation Sensitivity White Balance Built-in Flash Flash Range Flash Exposure Compensation Shooting Modes Continuous Shooting Interval Shooting Self-timer Wireless Control PC-controlled Shooting Recording Media File Format ± 2.0 stops in 1/3-stop increments Auto exposure bracketing (AEB) is available.
Image Recording Format Compression Number of Recording Pixels Playback Modes Direct Print Display Languages 154 Appendix Still images: JPEG (Exif 2.
My Camera Settings Interface Power Source Operating Temperature Operating Humidity Dimensions Weight The start-up image, start-up sound, shutter sound, operation sound and self-timer sound can be customized using the following methods: 1. Using the images and sounds recorded on a camera. 2. Using downloaded data from your computer using the supplied software. USB (mini-B, PTP [Picture Transfer Protocol]) Audio/Video output (NTSC or PAL selectable, monaural audio) 1.
Battery Performance (Battery Pack NB-2LH at full charge) CIPA standard Number of Images Shot Approx. 140 shots * The actual figures will vary according to the shooting condition and settings. Test Conditions Shooting: Normal temperature (23 °C ± 2 °C/73 °F ± 3.6 °F), normal relative humidity (50% ± 20%), alternating wide angle end and telephoto end shots at 30 second intervals with the flash fired once every two shots and the camera power turned off after every tenth shot.
CF Cards and Estimated Capacities (Recordable Images) PowerShot S70 L (Large) 3072 x 2304 pixels M1 (Medium 1) 2592 x 1944 pixels M2 (Medium 2) 2048 x 1536 pixels M3 (Medium 3) 1600 x 1200 pixels S (Small) 640 x 480 pixels RAW* 3072 x 2304 pixels 640 x 480 pixels 320 x 240 pixels 160 x 120 pixels Movie FC-32MH 9 15 33 11 21 43 18 33 67 30 54 107 119 195 336 3 45 sec. 91 sec. 241 sec. FC-64M 19 32 67 24 43 88 38 68 136 61 109 217 241 393 676 7 92 sec. 183 sec. 486 sec.
PowerShot S60 L (Large) 2592 x 1944 pixels M1 (Medium 1) 2048 x 1536 pixels M2 (Medium 2) 1600 x 1200 pixels S (Small) 640 x 480 pixels RAW* 2592 x 1944 pixels 640 x 480 pixels 320 x 240 pixels 160 x 120 pixels Movie FC-32MH 11 21 43 18 33 67 30 54 108 120 196 337 5 46 sec. 91 sec. 242 sec. FC-64M 24 43 88 38 68 136 61 109 217 241 393 676 12 92 sec. 183 sec. 486 sec.
Image File Sizes (Estimated) PowerShot S70 Compression Resolution L M1 M2 M3 S RAW 3072 x 2304 pixels 2592 x 1944 pixels 2048 x 1536 pixels 1600 x 1200 pixels 640 x 480 pixels 3072 x 2304 pixels 640 x 480 pixels Movie 320 x 240 pixels 160 x 120 pixels Wireless Controller WL-DC100 (Sold Separately) 3045 KB 2503 KB 1602 KB 1002 KB 249 KB 1897 KB 1395 KB 893 KB 558 KB 150 KB 7096 KB 660 KB/sec. 330 KB/sec. 120 KB/sec.
Battery Charger CB-2LT / CB-2LTE : AC 100 – 240 V (50/60 Hz) 0.17 A (100V) – 0.10 A (240V) Rated output : 8.4 V DC, 0.5 A Charging time : Approx. 90 minutes Operating : 0 – 40 °C (32 – 104 °F) temperatures Dimensions : 91 x 29.5 x 56 mm (3.6 x 1.2 x 2.2 in.) : CB-2LT: Approx. 86 g (3.0 oz.) Weight : CB-2LTE: Approx. 82 g (2.9 oz.
Photo Tips and Information Regarding the AF Frame (p. 76) RAW format (p. 57) AiAF* has a wide range of measuring for accurate focusing. AiAF focuses on the object even if it is not exactly in the center of the frame. * "Ai" stands for "Artificial intelligence" and "AF" stands for "Auto Focus." With the standard JPEG file format, the camera processes images after capturing them to produce optimal results. The JPEG format compresses images so that more can be stored on a single CF card.
or ImageBrowser (Macintosh), which are included with the camera, you can make fine adjustments to the image quality and coloration when the images are converted, while maintaining the high quality of the original image data. For further details, please refer to the Software Starter Guide. * image is too bright (p. 80). Dark Image Balanced Image Bright Image As measured by Canon’s testing standard. Tip for Using the Self-timer (p.
Folder File Capacity Each folder usually contains up to 100 images. However, since images shot in Continuous mode and Stitch Assist mode are always saved into the same folder, a folder may contain more than 100 images. The number of images may also exceed 100 if a folder contains images copied from a computer or images shot with other cameras. Please note, however, that the images in folders containing 2001 or more images cannot be played back in this camera. How to Adjust the Exposure (p.
Index Numerics 1st-curtain ............................................................. 93 2nd-curtain ............................................................ 93 A Adjusting the Exposure ......................................... 80 AE Lock ................................................................. 89 AEB Mode ............................................................. 86 AF-assist Beam ..................................................... 32 AF Frame ..........................................
File No. Reset ........................................................69 File Numbers .........................................27, 112, 162 Flash ..........................................................10, 38, 66 Adjustment Settings ........................................91 Sync ................................................................66 Timing at which the Flash Fires ......................93 Focus ...............................................................31, 96 Focus Lock .................
Movie Editing ............................................................. 60 Recording ....................................................... 58 Viewing ........................................................... 60 Mute ...................................................................... 68 My Camera Settings ............................................ 113 N Night Scene ........................................................... 48 O Omni Selector .....................................................
Shutter Button ..............................................................12 Pressing ..........................................................31 Sound ........................................31, 68, 113, 114 Speed ..............................................................72 Volume ............................................................68 Slide Show .....................................................68, 104 Play Time ......................................................107 Repeat ...........
FCC Notice (Digital Camera, Model PC1087 and PC1088) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
MEMO 169
MEMO 170
MEMO 171
MEMO 172
MEMO 173
Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode. You can shoot with the settings saved in the mode (p. 100). Ref.
Ref. Page On – – { { – { U – { – { – Off { { – – { – U* – {* { {* { On { { { { { { { – { {* {* – Off – – – – – – – – – { { { 1st-curtain { { { { { – { – {* {* {* {* 2nd-curtain – – – – – { – – { { { { Slow Synchro Flash Adjust Flash Sync p. 93 { { { { { { U { { { { { p.
Ref. Page AF Lock – { { { { { { { { { { { p. 97 Manual Focus – { { { { { { { { { { { p. 98 Macro Mode { { – { { { { { { { { { p.
Ref. Page Safety Shift On – – – – – – – – – { { – Off { { { { { { { { { {* {* { –(7) –(7) –(7) –(7) –(7) –(7) –(7) –(7) { { { {(8) p. 84 On {* {* {* {* {* {* U* – {* {* {* {* Off { { { { { { U { { { { { – – – – – – – – { { { { ISO Speed Auto Rotate JPEG Recording in RAW p. 75 p. 111 p. 67 * Default setting {: Setting selection is possible. U: Setting can only be selected for the first image. –: Setting selection is not possible.