Laser Printer Fax Copier Scanner Laser Printer Fax Copier Scanner TM See What We Mean.™ Quick Start Guide Quick Start Guide Congratulations on your purchase of the Canon MultiPASS™ L6000 Laser Printer Fax - Copier - Scanner. This Quick Start Guide describes the steps you follow to unpack and set up your new multi-talented printer. Important! You must follow the steps described in this Quick Start Guide. ©1997 Canon Computer Systems, Inc. CST-4445-000 Printed in U.S.A.
Important! Before you start, make sure you have the following computer setup. (These are the minimum requirements.) IBM® PC or compatible computer with a 486 PC processor or better (Pentium® recommended) Microsoft® Windows® 95 (not compatible with Windows 3.
2 Make sure your documentation package includes these items. MultiPASS L6000 and Creative Web Solutions CD (INSTALL ME FIRST) Quick Start Guide (this booklet) User's Manaul Registration card Warranty card Customer Care rolodex card Be sure to register electronically or fill out your Registration card and send it to Canon. After you set up the MultiPASS L6000, you can fax the Registration card directly to Canon (see the Registration card for details).
5 Peel the clear protective sheet off the LCD display. Setting Up the MultiPASS L6000 Place the main unit of the MultiPASS L6000 on a level surface with plenty of room to work. Attaching Miscellaneous Items 1 Attach the paper rest. With the paper rest tilted toward you, fit the tabs on the paper rest into the slots above the multi-purpose tray. Gently move the paper rest back into position.
2 Attach the paper loading label. The paper loading label is included with your MultiPASS unit. Attach the label to the left of the multi-purpose tray. 3 Attach the extension tray. Lift up the front of the MultiPASS L6000 unit. Slide the extension tray into the rails on the bottom of the unit.
4 Attach the support trays. There are two identical support trays. One of the support trays holds paper as it comes out of the facedown delivery slot. To install this support, insert the tabs into the corresponding slots above the facedown delivery slot, making sure that the smaller tab is on the left. FACEDOWN DELIVERY SLOT The other support tray holds documents as they are fed into the Automatic Document Feeder (ADF).
Connecting the Phone Line(s), Printer Cable, and Power Cord 1 Connect the phone line. Connect one end of the supplied telephone line to the L jack on the side of the MultiPASS. Connect the other end of the line to the telephone jack in your wall. 2 Connect a telephone, answering machine, or data modem. HINTS ! You can connect a telephone, answering machine, or data modem to the on the side of the MultiPASS.
Connecting the Phone Line(s), Printer Cable, and Power Cord 1 Connect the phone line. Connect one end of the supplied telephone line to the L jack on the side of the MultiPASS. Connect the other end of the line to the telephone jack in your wall. 2 Connect a telephone, answering machine, or data modem. HINTS ! You can connect a telephone, answering machine, or data modem to the on the side of the MultiPASS.
3 Connect a bi-directional parallel cable to the MultiPASS. Make sure the computer is turned off. You can purchase a Centronics-compatible, parallel cable with bi-directional capability from your dealer or from any computer store. Make sure the cable is IEEE 1284-compliant. A cable of 6.6 feet or less in length is recommended. Align the cable connector with the interface port so the shapes match. Gently press the cable connector into the port.
4 Attach the power cord. Plug the power cord connector into the back of the unit. Plug the other end of the power cord into a properly grounded AC outlet (three-pronged outlet). The MultiPASS L6000 has no power switch. The power is on as long as the system is plugged in. As the MultiPASS warms up, it displays the PLEASE WAIT message in the LCD.
Installing the FX-3 Toner Cartridge Caution Spilled toner can stain any surface. Open the FX-3 Toner Cartridge very carefully. See your User's Manual for complete details on toner cartridge maintenance. 1 Open the front cover. Press the release latches on the sides of the unit and gently pull the cover forward. 2 Prepare the toner cartridge. Remove the new FX-3 Toner Cartridge from its protective bag. Save the protective bag; you may need to repack the cartridge later.
Place the cartridge on a flat clean surface, and steady it with one hand. Remove the seal by pulling on the plastic tab with your other hand. Use a firm, even pull to remove the plastic seal. To avoid breaking the seal, do not jerk on it unevenly. SIDE VIEW PULL IN THIS DIRECTION TOP VIEW PULL IN THIS DIRECTION 3 Insert the toner cartridge into the unit. Align the rails on the left and right sides of the cartridge with the guides inside the unit. Slide the cartridge into position.
Gently press the cartridge into the unit as far as it will go. Press down and back on the cartridge's handle. 4 Close the front cover. When it is ready to operate, the MultiPASS displays the date and Receive Mode. This is called the Standby mode. 11/22/97 FaxTel Unplug the MultiPASS L6000 ONLY when it is in Standby mode (the date and Receive Mode show in the display).
Loading a Stack of Paper 1 Fan a stack of paper. You can stack up to 100 sheets of plain paper in the multi-purpose tray. Fan the edge that will feed into the MultiPASS first; then tap the stack on a flat surface to even its edges. 2 Open the paper guides. Open the paper guides to the approximate width of the stack of paper.
3 Insert the stack of paper. Make sure the side you will be printing on faces you and insert the top edge into the multi-purpose tray first. Insert the stack until it stops, but do not force it. 4 Adjust the paper guides to the width of the paper. Make sure there is no space between the paper guides and the stack of paper. Your MultiPASS L6000 is now ready to print. Avoid mixing new paper with paper remaining in the tray.
The MultiPASS L6000 Software The MultiPASS L6000 comes with the following software: MultiPASS L6000 Printer Driver, MultiPASS Desktop Manager for Windows 95, and ScanGear for MultiPASS. Once all of this software is installed, you have access to all the printing, faxing, copying, and scanning capabilities of the MultiPASS L6000. Your MultiPASS L6000 also includes Canon's Creative Web Solutions and the awardwinning TextBridge® Classic OCR software.
The Automatic Installation Procedure Your MultiPASS L6000 comes with a Master Installer that makes installing the MultiPASS software easy and fast. The Master Installer starts up and loads the software in this order: Start up your system and start Windows 95. See page 17 for details. (You must follow the instructions starting on page 17.) First you see a Welcome screen followed by the Canon license agreement.
Starting the Installation Procedure Important! If you have a previous version of the MultiPASS Desktop Manager installed, you must use the MultiPASS Uninstaller to remove it before beginning installation of the MultiPASS L6000. See your User's Manual for details. 1 Start up your system in this order. It's important to follow this order for the Windows 95 Plug and Play feature to work: 1. Make sure your computer is turned OFF. 2. Be sure the MultiPASS L6000 is plugged in and connected to the computer. 3.
3 The Master Installer starts. Follow the instructions on the screens. Installation Guidelines During the installation procedure, follow these guidelines: Press Next to move from one screen to the next. Make sure you are pressing Next or OK on the current dialog box. Be sure to wait for Windows to complete each setup procedure. If you hear your computer working, wait until it is done. See the description on page 19 for help in installing the faxing elements of your system.
Setting Up Your Faxing System During the installation of the MultiPASS Desktop Manager, you define the basic faxing elements of your MultiPASS system, including: Fax header Your name and number; this information is then printed on the top of each fax you send. In the United States, you are required by FCC regulations to include this information every time you send a fax. Be sure to fill in this information. Receive Mode How you will be receiving faxes.
Registration Tips for AT T WorldNet Service During installation of the AT&T WorldNet Service software, you will be prompted to dial into the network to complete the registration process. Make sure your modem line and phone line are available. During registration, you will need to supply your name, address, and valid credit card number, and choose an account-information security word, e-mail name, and e-mail password. You will also be requested to select your preferred price plan at this time.
Whether online or off-line, 24 hours a day, 7 days a week, AT&T will provide world-class technical expertise and fast, reliable responses to your questions about AT&T WorldNet Service. To reach AT&T WorldNet Customer Care, call 1-800-400-1447. We want to do all we can to make sure that your Internet experience is a truly enriching and satisfying one. Using the MultiPASS Desktop Manager You start the MultiPASS Desktop Manager from the Programs list. Click Start, Programs, and Canon MultiPASS L6000.
Running Creative Web Solutions Software Running AT&T WorldNet Service including Microsoft Internet Explorer: 1. Make sure your modem and phone line are available. 2. Double click the Connect to AT&T WorldNet Service icon on your desktop. 3. Click Connect. Running WebRecord or Internet Utilities 97: 1. 2. 3. 4. From the Windows taskbar, click Start. Select Programs. Select Canon Creative. Select WebRecord or Internet Utilities 97. Technical Support AT T WorldNet Service AT&T Web: http://www.worldnet.att.
Canon Customer Care Center Canon Computer Systems, Inc. offers a full range of customer technical support options including*: 24-hour, 7-day-a-week, toll-free automated support for troubleshooting issues on most current products (1-800-423-2366) Speak to a technician free of service charge (currently Monday Friday, 8:00 am -10:00 pm EST and Saturday, 12:00 pm - 6:00 pm EST, excluding holidays) for products still under warranty** (1-757-413-2848) Speak to a technician (currently $24.