User`s guide

Specifying Common Settings

4-21

Customizing Settings

Tone Settings

You can set whether to sound audible tones. The following tones sound at the following times:

IMPORTANT

The Forgot Original Tone is available only if the optional Feeder (DADF-K1) is attached.

NOTE

The default setting is 'On' for [Entry Tone], [Error Tone], and [Job Done Tone], and 'Off' for [Invalid Entry

Tone], [Restock Supplies Tone], and [Forgot Original Tone].

Press ➞ [Common Settings] ➞ [Audible Tones].

Select [On] or [Off] for the desired tones ➞ press [OK].

The selected mode is set.

Entry Tone: When pressing keys on the control panel or keys on the touch panel

display

Invalid Entry Tone: When an invalid key on the control panel or touch panel display is

pressed, or when the maximum number of characters allowed is

exceeded

Restock Supplies Tone: When the toner cartridge needs to be replaced

Error Tone: When a malfunction occurs (e.g., paper jam or operational error)

Job Done Tone: After a job completes (e.g., outputting, stapling, or faxing is complete)

Forgot Original Tone: When originals are placed in the optional feeder without removing a

previously placed original that still remains on the platen glass, or vice

versa