User`s guide

Specifying Common Settings
4-28
4
Customizing Settings
Energy Saver Mode
If you press on the control panel, the machine goes into the Energy Saver mode. While in the
Energy Saver mode, the temperature of the fixing unit is lowered, which enables you to
conserve electricity.
You can set the energy saving level to -10%, -25%, -50%, or None.
Follow the procedure below to set the Energy Saver Mode.
NOTE
• If you set the Energy Saver Mode setting to [-10%], [-25%], or [-50%], you will have to wait for a while
before copying or printing is possible once the Energy Saver mode is deactivated.
• After deactivating the Energy Saver mode, the machine's recovery time may vary, depending on the
energy saving level setting and the surrounding environment (i.e., temperature, humidity, etc.).
• The default setting is '-10%'.
1 Press ➞ [Common Settings] ➞ [Energy Saver Mode].
2 Select the desired energy saving level ➞ press [OK].
Select [None] (0%) if you want to be able to copy or print immediately.
The selected mode is set.