User`s guide

Specifying Common Settings
4-30
4
Customizing Settings
1 Press ➞ [Common Settings] ➞ [Energy Consumption in Sleep
Mode].
2 Select [Low] or [High] ➞ press [OK].
Details of each item are shown below:
The selected mode is set.
NOTE
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the
touch panel display to be displayed after pressing the control panel power switch.
Output Tray Designation
You can designate the machine's output trays to be used for specific functions.
NOTE
• The same output tray can be designated for multiple functions.
• The default settings are:
- If no finisher is attached:
Tray A: Copy, Mail Box, Printer, Receive/Fax, Other
Tray B and C: (No setting)
- If the optional Finisher-M1 is attached:
Tray A: Copy, Mail Box, Printer
Tray B: Receive/Fax, Other
- If the optional Finisher-N1 or Saddle Finisher-N2 is attached:
Tray A: Copy, Mail Box
Tray B: Printer
Tray C: Receive/Fax, Other
1 Press ➞ [Common Settings] ➞ [Tray Designation].
[Low]: Energy consumption in the Sleep mode is low, but it takes longer to recover from the
Sleep mode.
[High]: Energy consumption in the Sleep mode is high, but it takes shorter to recover from
the Sleep mode.