User`s guide

Specifying Common Settings
4-34
4
Customizing Settings
The optional Saddle Finisher-N2 is attached.
The selected mode is set.
IMPORTANT
• If a certain tray reaches its stacking limit, the machine automatically uses another tray that is
designated for the same function. However, it is recommended that you only designate one tray
for fax/I-fax documents to prevent them from getting lost.
• If no finisher is attached to the machine, you cannot select both Tray A and Tray B, or both Tray B
and Tray C for the selected functions.
• If no finisher is attached to the machine, you must attach the optional Copy Tray Unit-H1 to be
able to use Tray C as an output tray.
Setting the Printing Priority
You can set the machine's printing priority. A job that belongs to a function with a higher set
priority is printed after the job currently being processed is complete.
NOTE
• Priority printing does not take place until the current job is complete. However, if the current job is
paused, the printing of a job that belongs to a function with a higher set priority may start, depending on
the settings.
• The default settings are shown below. However, if the optional Color Image Reader-C1 is not attached,
the default settings and the keys that appear on the screen will be different.
- Copy: 1 (Highest priority on models with the optional Color Image Reader-C1)
- Printer: 2
- Mail Box: 3
- Receive/Fax: 3
- Other: 3