User`s guide

Replacing the Waste Toner Container
7-34
7
Routine Maintenance
Replacing the Waste Toner Container
When the waste toner container is full, procedure for replacing the container appears on the
touch panel display, as shown below. Follow the instructions on the touch panel display, and the
procedure described below to help you replace the waste toner container.
If you press [Recover Later], you can continue operations, such as setting modes and scanning
originals, even if you do not replace the waste toner container immediately.
WARNING
• Do not burn or throw used waste toner containers into open flames. Also, do not store waste
toner containers in places exposed to open flames, as this may cause the toner to ignite and
result in burns or a fire.
• Your local authorized Canon dealer will dispose of the used waste toner container. Use the
provided cover to cover up the opening of the used waste toner container.
CAUTION
Used toner cannot be reused. Do not mix new and used toner together.
IMPORTANT
• Use only waste toner containers intended for use with this machine.
• Do not replace the waste toner container before the message prompting you to replace it is displayed.
NOTE
• Complete instructions on how to replace the waste toner container can be accessed by pressing
[Previous] or [Next] on the touch panel display.
• If the waste toner container must be replaced during a print job, the remaining prints are made after the
new waste toner container is installed.