Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-73
FS-S2-1
Effective in special paper 2 mode and, in addition, when copying on a one-
sided copy.
Settings range –5 ~ +5 (Standard: 0)
Unit: 25 µA
FS-S2-2
Effective in special paper 2 mode and, in addition, when copying on the
2nd side of a two-sided copy.
Settings range –5 ~ +5 (Standard: 0)
Unit: 25 µA
FS-S3-1
Effective in special paper 3 mode and, in addition, when copying on a one-
sided copy or on the 1st side of a two-sided copy.
Settings range –5 ~ +5 (Standard: 0)
Unit: 25 µA
FS-S3-2
In special paper 3 mode and, in addition, when copying on the 2nd side of a
two-sided copy.
Settings range –5 ~ +5 (Standard: 0)
Unit: 25 µA
The setting of this item will return to the default value when the PCB is replaced or the
RAM is cleared, requiring input once again. Be sure to record any new setting you have
made on the service label.
REF.
This mode will prove effective when correcting image distortion under each
item in question.