Service manual

Chapter 3
3-10
F-3-53
3) Remove the 2 screws [1] of the side; then, remove the 3 claws [2] to detach
the right cover [3].
MEMO
It is difficult to release three claws [2]. If you release the lowest one first,
the second lowest, and then the top, it becomes easy.
F-3-54
F-3-55
3.2.6 Upper Right Cover
3.2.6.1 Removing the Rear Cover
0007-8453
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-56
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-57
4) Close the reader assembly; then, detach the rear cover[1].
F-3-58
3.2.6.2 Removing the Reader Assembly
0008-9836
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-59
[1]
[2]
[1]
[2]
[2]
[3]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]