Service manual

Chapter 3
3-11
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-60
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-61
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-62
5) Remove the 6 screws [1], and lift the reader unit to detach.
F-3-63
3.2.6.3 Removing the Scanner Unit
0008-9843
1) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
F-3-64
3.2.6.4 Removing the Upper Right Cover
0007-8490
1) Remove the 2 screws [1]; then, remove the 5 claws [2] to detach the upper
right cover [3].
F-3-65
3.2.7 Upper Left Cover
3.2.7.1 Removing the Rear Cover
0007-8499
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[1]
[2]
[1]
[3]
[2]
[2]
[1]
[1]
[1]
[1]
[2]
[1]
[2]
[2]
[1]
[3]
[1]