Service manual

Chapter 3
3-12
F-3-66
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-67
4) Close the reader assembly; then, detach the rear cover[1].
F-3-68
3.2.7.2 Removing the Reader Assembly
0008-9847
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-69
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-70
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-71
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-72
5) Remove the 6 screws [1], and lift the reader unit to detach.
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[2]
[1]