Service manual

Chapter 3
3-13
F-3-73
3.2.7.3 Removing the Scanner Unit
0008-9848
1) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
F-3-74
3.2.7.4 Removing the Upper Left Cover
0007-8500
1) Remove the 2 screws [1]; then, remove the 5 claws [2] to detach the upper
left cover [3].
F-3-75
3.2.8 Face-up cover
3.2.8.1 Removing the Fixing Assembly
0011-7848
1) Turn the lever [1] of the fixing assembly 90 deg in the direction of the
arrow.
2) While holding the grip [2], slide out the fixing assembly [3] toward the
front and out of the machine.
Whenever you have to replace the fixing assembly, be sure to disconnect the
power cord first. Also, be sure to wait unit the fixing assembly has cooled
before removing it after disconnecting the power cord.
F-3-76
3.2.8.2 Removing the Face-Up Cover
0011-7553
1) Turn the fixing lever [1] of the fixing assembly 90 deg in the direction of
the arrow.
2) Remove the 4 claws [2], and detach the face-up cover [3] from the fixing
assembly.
F-3-77
3.2.9 Main Drive Unit
3.2.9.1 Removing the Rear Cover
0007-8553
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-78
3) Open the reader assembly [4], and lift to free the 2 claws [5].
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[3]
[1]
[1] [1][3] [2]
[1] [1]
[2]
[3]
[2]
[3]
[1]
[3]