Service manual

Chapter 3
3-21
F-3-129
9) Disconnect the connector [1] and the cable [2].
F-3-130
10) Disconnect the connector, remove the screw [2], and detach the fan [3]
together with cover.
F-3-131
11) Remove the two screws [1], and detach the cable guide [2].
F-3-132
Never remove the SCNT board.
F-3-133
3.2.12 DCNT Board
3.2.12.1 Removing the Rear Cover
0007-7954
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-134
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-135
4) Close the reader assembly; then, detach the rear cover[1].
[2] [1]
[1]
[2]
[2] [3]
[1]
[2]
[1]
[2]
[3]
[1]
[3]
[4]
[5]