Service manual

Chapter 3
3-28
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-178
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-179
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-180
5) Remove the 6 screws [1], and lift the reader unit to detach.
F-3-181
3.2.15.3 Removing the Power Supply Assembly
0007-7022
1) Remove the 6 screws [1], and detach the power supply assembly [2].
F-3-182
3.2.15.4 Removing the Power Supply PCB
0007-7023
1) Remove the claw [1], and detach the cover [2].
F-3-183
2) Disconnect the 3 connectors [1], and remove the 4 screws [2]; then, detach
the power supply PCB [3].
F-3-184
[1]
[2]
[1]
[3]
[2]
[2]
[1]
[1]
[1]
[1]
[2]
[1]
[1]
[1]
[1]
[1] [2]
[1] [2][2]
[2] [2]
[3]