Service manual

Chapter 3
3-31
F-3-198
3.2.16.7 Removing the Face-Down Cover
0007-8534
1) Remove the 2 screws [1], and slide the face-down cover [2] in downward
direction to detach.
F-3-199
3.2.16.8 Removing the Top Cover
0007-8536
1) Remove the claw [1], and detach the ring gear [2].
2) Free the link lever [3] from the shaft [4].
F-3-200
3) Remove the 3 binding screws [1] and 2 TP screws [2]; then, disconnect
the connector [3], and detach the top cover [4].
F-3-201
When attaching the top cover, be sure to match its 2 positioners [1] and the
2 cut-offs [2] of the face-down sub cover, while making sure that the paper
retainer [3] is not blocking the feed path.
F-3-202
F-3-203
When attaching the top cover, be sure to fit the link lever [2] while keeping
the drive release lever [1] in up position (i.e., with drive disengaged).
[2]
[1]
[1]
[1]
[1]
[1]
[2]
[2]
[4]
[3]
[1]
[4]
[1]
[1]
[2]
[3]
[1]
[2]
OK NG
Enlarged View of the Paper Retainer
[3]
[3]