Service manual

Chapter 3
3-44
F-3-279
3.2.19.2 Removing the Reader Assembly
0007-8578
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-280
When closing the reader assembly, be sure to push in the arm [1] first.
F-3-281
2) Open the left and right claws in the direction of the arrows, and detach the
hinge cover [1].
3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected to
the reader assembly.
F-3-282
4) Open the harness band [1], and disconnect the 2 cables connected to the
reader assembly.
F-3-283
5) Remove the 6 screws [1], and lift the reader unit to detach.
F-3-284
3.2.19.3 Removing the Right Cover
0007-8601
1) Remove the 2 screws [1] of the side; then, remove the 3 claws [2] to detach
the left cover [3].
F-3-285
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[3]
[2]
[2]
[1]
[1]
[1]
[1]
[1]