Service manual

Chapter 3
3-47
F-3-298
3.2.19.10 Removing the Machine Inside Temperature
Thermistor
0007-8934
1) Disconnect the connector [1], and remove the screw [2]; then, detach the
machine inside temperature thermistor [3].
F-3-299
3.2.20 Cooling Fan
3.2.20.1 Removing the Rear Cover
0007-8559
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-300
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-301
4) Close the reader assembly; then, detach the rear cover[1].
F-3-302
3.2.20.2 Removing the Reader Assembly
0007-8577
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-303
When closing the reader assembly, be sure to push in the arm [1] first.
[2]
[2]
[3]
[1]
[1]
[2]
[3]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]