Service manual

Chapter 3
3-55
the operation panel [3].
F-3-353
3.3.3.6 Removing the Scanner Cover Unit
0007-8081
1) Remove the copyboard cover.
2) Remove the 2 screws [1].
3) Remove the 6 claws [2], and detach the scanner cover unit [3].
F-3-354
3.3.4 CCD Unit
3.3.4.1 Removing the Rear Cover
0007-8095
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-355
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-356
4) Close the reader assembly; then, detach the rear cover[1].
F-3-357
3.3.4.2 Removing the Scanner Unit
0007-8096
1) Remove the platen glass cover.
2) While removing the left and right claws, detach the hinge cover [1].
3) Remove the screw [2], and detach the cable guide [3].
F-3-358
4) Open the harness band [1], and free the 2 cables [2] connected to the
reader assembly.
F-3-359
5) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
[1][2] [2]
[3]
[1]
[2]
[2]
[3]
[2]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[3]
[2]
[2]
[1]