Service manual

Chapter 3
3-62
F-3-404
2) Remove the 2 screws [1], and detach the harness guide [2] and the
Document feed motor unit [3].
F-3-405
3) Remove the spring [1] and the screw [2], and detach the arm [3].
F-3-406
4) Remove the 2 screws [1], and detach the drive unit [2].
F-3-407
5) Remove the spring [1], and detach the arm [2].
F-3-408
6) Remove the 2 screws [1], and detach the ADF inside cover [2].
F-3-409
7) Remove the claw [1], and detach the gear [2] and the bearing [3].
F-3-410
8) Remove the claw [1], and detach the gear [2] and the bearing [3].
F-3-411
9) Remove the E-ring [1], and slide the shaft [2] in the direction of the arrow
to detach the feed roller [3].
Note:
When removing the feed roller, pay attention to the parallel pin [4] of the
shaft.
[1]
[2]
[3]
[4]
[1]
[2][3]
[1][2][3]
[1]
[2]
[1]
[2]
[2]
[1]
[1]
[2]
[3]
[1]
[2]
[3]